The Canon PowerShot ELPH 110 HS connects to a Windows PC so you can copy photos and video clips from the camera to your computer. A compatible driver helps Windows recognize the camera over USB, though Windows may handle this connection with built-in support rather than requiring a separate Canon driver.

Key Features

• USB camera recognition: Helps Windows identify the connected camera and make its stored photos and videos available for import.
• Photo and video transfer: Supports access to captured media through compatible Windows import tools or Canon software, where supported.
• Windows integration: Works with the operating system’s device-management features to establish the camera connection and report recognition issues.
• Compatibility-focused setup: Choosing software for your specific Windows version helps avoid installation errors and unsupported components.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7. If a download offers separate editions, check whether your system is 32-bit or 64-bit. Availability of dedicated Canon drivers and utilities can vary by operating system.

1. Try the built-in connection first. With a charged battery installed, connect the Canon PowerShot ELPH 110 HS directly to the PC using a compatible USB data cable. Turn on the camera and enter playback mode if needed. Allow Windows to detect the device and configure any built-in driver.

1. Install additional software only if needed. If the camera is not recognized or you need a Canon import utility, choose a package that explicitly lists this model and your Windows version. Disconnect the camera before running the installer unless its instructions say otherwise.

1. Complete setup and reconnect. Follow the installation prompts, restart Windows if requested, then reconnect the camera. Avoid USB hubs during initial setup, as a direct connection can help rule out power or communication problems.

1. Test a small import. Open a compatible photo-import application and copy a few images to confirm that the connection works. If detection fails, try another USB port or data cable and check Device Manager for errors.

If no compatible download is available for your Windows version, an SD card reader offers another way to transfer your pictures without installing a camera-specific driver. Keep the originals on the memory card until you have verified that the imported files open correctly.

Common Issues and Fixes

• Install fails or Canon software errors: The PowerShot ELPH 110 HS often needs no separate driver on Windows 10/11; use the built-in WIA/MTP driver. If Canon software fails, run the installer as administrator or in compatibility mode, and remove older Canon camera utilities first.
• Camera not detected: Use a known-good USB data cable directly into a rear USB port, not a hub. Turn the camera on and set it to playback/transfer mode. Check Device Manager under “Portable Devices” or “Imaging Devices”; if missing, scan for hardware changes or update via Windows Update.
• Version conflicts: Uninstall existing Canon camera drivers/software, disconnect the camera, reboot, then reconnect and let Windows install its inbox driver. Avoid third-party driver packs.