The Canon PIXMA MG5450 driver helps Windows communicate with your printer so documents, photos, and print settings are handled correctly. Installing the appropriate Canon software can also enable scanning features and maintenance tools, depending on the package you choose.

Key Features

• Print settings control: Adjust paper size, media type, print quality, and page layout to suit everyday documents or photo projects.
• Photo and duplex printing options: Access settings for supported borderless photo formats and automatic two-sided document printing.
• USB and wireless connectivity: Set up printing through a USB connection or over your local Wi-Fi network, using a driver package that supports your connection method.
• Scanning and maintenance support: Compatible Canon software can provide scanning controls, ink status information, nozzle checks, and print-head cleaning tools.

How to Install

1. Check your Windows version. Before downloading, confirm whether your computer runs Windows 11, 10, 8, or 7. Check the package’s listed compatibility and whether it requires a 32-bit or 64-bit system; older packages may not explicitly support newer Windows releases.

1. Select the appropriate package. Choose a driver listed for the Canon PIXMA MG5450 and your operating system. If you need scanning as well as printing, review the package contents for scanner support or a separate Canon scanning utility.

1. Prepare the printer and connection. Turn on the printer and clear any displayed errors. For wireless installation, connect the printer and computer to the same local network. For USB setup, leave the cable disconnected until the installer asks you to connect it.

1. Run the installer. Open the downloaded file, allow changes if Windows prompts you, and follow the setup instructions. Select USB or wireless when offered, then choose your printer from the detected devices.

1. Verify the installation. Restart the computer if requested, then print a test page from Windows printer settings. If you installed scanning software, try scanning a document too. If the printer is not detected, check the USB cable or network connection before repeating setup.

Using a package matched to both the printer and your Windows installation helps avoid missing settings and connection problems. If Windows 11 compatibility is not listed, check Canon’s available support guidance rather than assuming a Windows 10 driver will work.

Common Issues and Fixes

• Install fails or stalls: Disconnect the MG5450, remove older Canon PIXMA/IJ software and stale USB printer ports, reboot, then run the Canon MG5400-series setup as administrator. Reconnect only when prompted.
• Device not detected: Try a direct rear USB port and a known-good cable. For Wi-Fi, run Canon IJ Network Device Setup on the same 2.4 GHz network/subnet; confirm the MG5450’s network lamp is lit.
• Driver/version conflicts: Windows may assign a WSD or generic PIXMA driver. Remove the printer and old Canon driver package, reboot, install the latest MG5400-series driver from Canon, then set the MG5450 as default.