The Canon iR2545 driver enables Windows to communicate with this Canon multifunction printer over a network, allowing applications to send print jobs and use the device’s available print settings. Choose a package compatible with Windows 11, 10, 8, or 7 and your system architecture to help ensure a smooth setup.

Key Features

• Network printing support: Connects your PC to the Canon iR2545 through your local network so you can print without a direct USB connection.
• Print configuration controls: Provides access to settings such as paper size, orientation, copy count, and duplex printing, depending on the selected driver and device configuration.
• Paper source selection: Helps Windows recognize available trays and lets you choose the appropriate paper source for each job.
• Device option management: Allows supported accessories and installed options to be configured in the printer properties, keeping the choices shown on your PC aligned with the hardware.

How to Install

1. Check your Windows system. Confirm whether you are running Windows 11, 10, 8, or 7, and check your system type in Windows Settings or Control Panel. Select a Canon iR2545 driver package that explicitly supports your Windows version and architecture.
2. Prepare the network connection. Turn on the printer and make sure your computer can reach it on the network. Locate the printer’s IP address in its network settings or on a printed configuration report.
3. Download and extract the driver. Save the compatible package to your computer. If it is compressed, extract its contents before starting installation.
4. Add the printer. Run the included installer and follow its prompts for a network connection. If automatic discovery does not find the device, use Windows’ Add Printer option to add it by IP address, then select the extracted driver when prompted.
5. Verify the setup. Open Printer Properties, review the installed trays and other available options, and print a test page. If printing fails, check the printer’s IP address and port settings before reinstalling.

For shared office use, confirm the correct printer address with your network administrator. Scanning may require separate Canon software; installing a print driver alone does not necessarily enable every multifunction feature.

Common Issues and Fixes

• Install fails or setup cannot find the iR2545: Run the Canon installer as administrator, confirm you are using the iR2545 UFR II/PCL package (not a generic iR series driver), and remove any partially installed Canon printer/scan drivers before retrying.
• Device not detected on the network: Assign the copier a static IP, confirm PC and iR2545 are on the same subnet, enable RAW/Port 9100 or SNMP in the printer settings, and allow Canon setup through Windows Firewall. If discovery still fails, add the printer manually by IP.
• Driver version conflicts: Remove old Canon UFR II, PCL, and scan drivers via Print Management, reboot, then install one matching driver set for your Windows architecture. Avoid mixing 32-bit and 64-bit packages on print servers.