The Canon iR1025 driver helps Windows communicate with your Canon multifunction device so you can send print jobs and access the settings supported by your configuration. For a network-connected unit, installing the appropriate driver also lets you set up a printer connection using its network address. Choose a package that explicitly supports your version of Windows 11, 10, 8, or 7 before downloading.

Key Features

• Network printing support: Connects Windows to a network-enabled Canon iR1025 through a configured printer port, allowing users on the same network to submit print jobs.
• Print preferences: Provides access to supported options such as paper size, orientation, copy count, and print quality.
• Device configuration: Helps Windows recognize available paper sources and finishing options when those features are supported and configured.
• Windows print queue integration: Works with the Windows printing system so you can view queued documents, cancel jobs, and manage printer preferences.

How to Install

1. Check your Windows version and system type. Open your PC’s system information to confirm whether you use Windows 11, 10, 8, or 7, along with the system architecture. Select a Canon iR1025 driver package that lists a matching configuration; compatibility can vary between driver releases.

1. Prepare the printer connection. Turn on the device and confirm that its network connection is active. Make sure your computer can reach the printer, and note the printer’s IP address from its network settings or configuration report.

1. Download and extract the driver. Save the compatible package to your computer. If it is compressed, extract all files to an accessible folder before starting installation.

1. Run setup or add the printer manually. Launch the installer and follow its prompts for a network connection. If no installer is included, use Windows’ Add printer option, enter the device’s IP address, and select the extracted driver files when prompted.

1. Confirm settings and print a test page. Review the selected port, paper settings, and installed device options. Print a test page to check communication. If the printer appears offline, verify its IP address and network connection before reinstalling.

Printing, scanning, and fax functions may use separate software. Check the package description if you need capabilities beyond network printing.

Common Issues and Fixes

• Install fails or stalls: Run the Canon iR1025 driver installer as administrator and use Windows compatibility mode for older packages. Disconnect the USB cable until prompted, then reboot before retrying.
• Device not detected: For USB, use a rear direct port, not a hub. For network, confirm the iR1025 has a fixed IP and that the PC can ping it; re-add the printer by IP rather than hostname.
• Driver/version conflicts: Remove old Canon iR1025 or iR1024 printer entries and drivers via Print Management, restart the Print Spooler service, then install the correct 32/64-bit package. If scanning fails, install the matching Canon scanner driver separately.