The Canon IR Adv C5045 5051 driver allows Windows to communicate with your Canon multifunction printer over a network. Installing a compatible driver helps applications send print jobs correctly and gives you access to the printing options available on your device.

Key Features

• Network printing support: Connects your PC to the printer through its network address, making it practical for shared office use.
• Print settings control: Provides options for paper size, orientation, color mode, and two-sided printing, depending on the selected driver and printer configuration.
• Installed accessory recognition: Lets you configure available paper trays and finishing equipment so the print dialog reflects the machine’s actual capabilities.
• Windows compatibility options: Driver selection for Windows 11, 10, 8, and 7 helps match the software to your operating system. Confirm that the individual package supports your Windows version and system architecture before downloading.

How to Install

1. Check your Windows configuration. Open your system information to confirm your Windows version and whether your PC uses a 32-bit or 64-bit architecture. Choose a Canon driver package that explicitly lists support for your system and the Canon IR Adv C5045 5051.

1. Prepare the network connection. Make sure the printer is powered on and connected to a network your computer can access. Note its IP address from the printer’s network settings or configuration report if automatic discovery is unavailable.

1. Download and extract the driver. Save the compatible package to your computer. If it arrives as a compressed archive, extract its contents before starting installation.

1. Run the installer. Follow the setup prompts, select a network connection, and choose the detected printer. If the device does not appear, enter its IP address when prompted or use Windows’ Add printer option to create a TCP/IP connection and select the extracted driver.

1. Confirm settings and test printing. Open Printer properties to check any installed trays or finishing options, then print a test page. If printing fails, verify the printer’s IP address, connection status, and selected port before reinstalling.

Printing and scanning may require separate software packages. If you need network scanning, check for a compatible Canon scanning utility rather than assuming it is included with the print driver.

Common Issues and Fixes

• Install fails or stalls: Remove older Canon imageRUNNER ADVANCE drivers via Print Management, run the C5045/C5051 installer as administrator, and match the driver architecture (x86/x64) to Windows. Reboot before retrying.
• Device not detected: Confirm the copier’s IP address, enable SNMP, and create a Standard TCP/IP port. Check firewall rules and disable sleep mode during setup; avoid WSD if the device drops offline.
• Version conflicts: Don’t mix PCL and UFR II drivers for the same queue. Delete stale queues/ports, install the latest Canon driver, then set one default queue for C5045/C5051 to prevent duplicate or wrong-driver printing.