The Canon iR ADV C2020 2030 UFR II driver allows Windows to send print jobs to compatible Canon imageRUNNER ADVANCE C2020 and C2030 multifunction printers. It provides the UFR II printing interface and access to printer settings, helping you configure output for everyday office documents over a network.

Key Features

• UFR II printing support: Uses Canon’s UFR II print system to process documents for compatible devices.
• Document output controls: Provides settings such as paper size, orientation, copy count, and color or black-and-white output, depending on the printer configuration.
• Network printer setup: Supports printing to a compatible Canon device on your local network when the correct address and connection settings are configured.
• Device-specific options: Allows supported paper trays, duplex printing, and installed finishing accessories to be reflected in the print settings. Available options depend on the hardware fitted to your printer.

How to Install

1. Check your Windows version. Choose a Canon iR ADV C2020 2030 UFR II driver package compatible with Windows 11, 10, 8, or 7, as applicable. Confirm that the package matches your system architecture; a package intended for one Windows version may not support every other version listed.

1. Prepare the network connection. Turn on the printer and make sure your computer can reach it on the network. If you plan to add it manually, find its IP address through the printer’s network settings or a printed configuration report.

1. Extract and launch the installer. Unpack the downloaded files if necessary, then run the setup program. Approve the Windows administrator prompt when requested and follow the on-screen instructions.

1. Select or add the printer. Use network discovery if the installer offers it, or enter the printer’s IP address. If there is no setup program, use Windows’ Add Printer option, create an appropriate network port, and browse to the extracted driver files when prompted.

1. Verify the configuration. Open Printer Properties, check any installed accessories or paper sources, and print a test page. If the printer does not respond, confirm its IP address and network availability before reinstalling.

This package is for printing. Scanning and other multifunction features may require separate Canon software.

Common Issues and Fixes

• Install fails or hangs: Remove stale Canon iR ADV C2020/C2030 UFR II entries in Print Management, restart Print Spooler, then run installer as admin. For network installs, create a Standard TCP/IP port to the printer IP and select the correct UFR II driver.
• Device not detected: Verify the C2020/C2030 is on the same subnet, ping its IP, and check TCP/IP is enabled. For USB, reseat the cable into a rear port and avoid hubs; for network, try LPD/RAW or WSD as appropriate.
• Version conflicts/duplicate queues: Delete old C2020/C2030 queues and UFR II driver packages, reboot, then install the latest Canon UFR II driver for your OS architecture. Keep one default queue and update printer firmware if jobs still fail.