The Canon iPF750 is a large-format printer designed for technical drawings, plans, posters, and other oversized documents. Its driver connects the printer with Windows applications, allowing you to configure page dimensions, media settings, and print quality before sending a job.

Key Features

• Large-format page setup: Configure paper sizes, orientation, and scaling to help drawings and layouts fit the intended output.
• Media and paper-source controls: Select settings that match the loaded paper and available feed options, helping avoid mismatched print jobs.
• Quality and color adjustments: Access supported print modes and color settings to balance sharp linework, image quality, and printing speed.
• Application-to-printer communication: Enables compatible Windows software to send print jobs using the printer’s supported capabilities.

How to Install

1. Check your Windows version. Before downloading, confirm whether your PC runs Windows 11, 10, 8, or 7, and check its system architecture. Choose a Canon iPF750 driver package that explicitly supports your configuration; compatibility can differ between releases.

1. Download the appropriate package. Verify that the download identifies the iPF750 as a supported model. If no package lists your operating system, consult Canon’s compatibility guidance rather than assuming an older driver will work.

1. Prepare the printer and connection. Turn on the printer and clear any errors shown on its display. For a network installation, make sure the printer is reachable from your computer. For USB setup, follow the installer’s instructions about when to connect the cable.

1. Run the installer. Extract the downloaded archive if necessary, open the setup program, and approve the Windows permission prompt. Select the connection method and follow the prompts to locate the printer and complete installation.

1. Confirm settings and test output. Open Windows printer settings and check that the Canon iPF750 appears. Review its printing preferences, select the correct media type and page size, then print a test page or a small sample document.

For CAD drawings or other scale-sensitive work, check scaling in both the application and the driver. An unintended “fit to page” setting can change printed dimensions even when the original document is correctly sized.

Common Issues and Fixes

• Install fails or stalls: Run the Canon imagePROGRAF installer as administrator, temporarily disable antivirus, and remove existing iPF750/other imagePROGRAF printer queues before retrying. Avoid installing through Windows Update.
• Device not detected: For Ethernet, confirm the printer and PC are on the same subnet, ping the iPF750’s IP, and use a static IP if discovery fails. For USB, connect directly to a rear port—not a hub—and try another cable.
• Driver/version conflicts: Uninstall old Canon imagePROGRAF drivers and queues in Print Management, restart Windows, then install the correct 32/64-bit iPF750 driver. Match the driver to your Windows version and avoid mixing older Canon utilities.