The Canon imageRUNNER ADVANCE 4235i driver lets your Windows computer communicate with the printer, translating documents into print jobs and giving you access to printing preferences. Choosing a compatible Canon driver helps you configure this office multifunction device correctly and use the options available on your setup.

Key Features

• Print settings control: Adjust paper size, orientation, copy count, and other document settings from the driver’s printing preferences.
• Double-sided printing: Select duplex options for reports and multipage documents to reduce paper use and keep printed materials organized.
• Paper source configuration: Set up available trays and select the appropriate paper source for different types of print jobs.
• Installed option support: Configure compatible accessories, such as finishing equipment, so supported output choices appear in the print settings. Available features depend on the driver package and the hardware installed.

How to Install

1. Check your Windows version. Identify whether you are using Windows 11, 10, 8, or 7, and confirm your system architecture. Select a Canon imageRUNNER ADVANCE 4235i driver package that explicitly supports your operating system.
2. Prepare the connection. Turn on the printer. For a network installation, make sure your computer can reach the device and note its IP address if needed. For USB installation, follow the installer’s instructions about when to connect the cable.
3. Download and extract the driver. Save the compatible package to your computer. If it is compressed, extract its contents before starting installation.
4. Run the setup. Open the installer and allow administrator permissions if prompted. Choose the appropriate connection method, then select the detected printer or enter its network address. If the package has no installer, use Windows’ Add printer option and browse to the extracted driver files.
5. Configure and test. Open the printer’s properties to check paper trays and installed accessories, then print a test page. If the device does not respond, verify the connection and printer port before reinstalling.

For the best match, check the package’s compatibility notes rather than assuming every driver supports all four Windows versions. A printing driver may not include scanning tools or other multifunction utilities; those may require separate Canon software.

Common Issues and Fixes

• Installer fails or stalls: Disconnect USB, remove old Canon iR ADV 4235i printer queues in Print Management, reboot, then run the UFRII/PCL installer as administrator. Temporarily disable antivirus if it blocks Canon setup files.
• Device not detected on network: Confirm the copier has a reachable static IP and responds to ping. Add a Standard TCP/IP port manually using that IP, select the Canon UFRII/PCL driver, and enable SNMP on the device if auto-discovery fails. For USB, avoid hubs and try another port/cable.
• Driver version conflicts: Uninstall old Canon UFRII, PCL, PS, and scan drivers, delete stale printer objects, then install the latest package matching Windows architecture. On print servers, do not mix 32-bit and 64-bit drivers.