The Canon imageRUNNER 2545 driver connects this multifunction printer to your Windows computer, allowing applications to send documents with the correct print settings. Selecting a compatible Canon driver helps you access available paper-handling options and configure the printer for everyday office work.

Key Features

• Print settings in one place: Adjust paper size, orientation, copy count, and other supported options from the Windows printing preferences.
• Two-sided printing controls: Choose duplex settings for compatible jobs to reduce paper use when printing reports, handouts, and internal documents.
• Paper source selection: Configure available trays and select the appropriate source for different paper types, depending on the printer’s installed equipment.
• Connection and device configuration: Set up printing over a supported USB or network connection and match driver settings to the printer’s available accessories.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7, and check its system architecture. Choose a driver package that explicitly supports your operating system and the Canon imageRUNNER 2545; compatibility can vary by package.

1. Prepare the printer and connection. Turn the device on and clear any errors shown on its control panel. For network installation, ensure the printer is reachable from your computer and note its IP address if needed. For USB installation, follow the installer’s instructions on when to connect the cable.

1. Download and extract the driver. Save the appropriate Canon printer driver package to your computer. If it is compressed, extract its contents before starting setup.

1. Run the installation. Open the setup program and follow the prompts, approving administrator access if requested. Select the detected printer or enter its network address. If the package has no installer, use Windows’ Add printer option and browse to the extracted driver files.

1. Verify the configuration. Open the printer’s properties, check the paper trays and duplex settings, and print a test page. If output fails, confirm the connection and selected printer port before reinstalling.

A printer driver does not necessarily include scanning tools. If you need scanning functionality, check for a separate compatible Canon utility or driver.

Common Issues and Fixes

• Installer fails or rolls back: Download the correct Canon imageRUNNER 2545 UFR II/PCL driver for your Windows architecture, extract the ZIP fully, and run setup as administrator. Remove partial Canon installations and restart the Print Spooler before retrying.
• Device not detected: Confirm the printer has a valid network IP and is on the same subnet. Ping it, then add it manually using a TCP/IP port (RAW port 9100 or LPD). Check that the correct port is selected and SNMP/network discovery is enabled.
• Old driver/version conflicts: In Print Management, delete existing imageRUNNER 2545 queues and conflicting Canon UFR II/PCL drivers. Restart the spooler, then install only the current driver package.