The Canon imageRUNNER 2520 driver connects this multifunction office printer to your Windows PC, allowing applications to send print jobs with the correct settings. For Windows 11, 10, 8, or 7, choose a Canon driver package that explicitly supports your operating system and system architecture.

Key Features

• Printer-specific settings: Access paper size, orientation, copy count, and other print options supported by the imageRUNNER 2520 and the selected driver.
• Double-sided printing controls: Configure duplex output for everyday office documents, helping reduce paper use when two-sided printing is available.
• Paper source selection: Choose available paper trays and match document settings to loaded media for more consistent results.
• Device configuration: Set up supported accessories and installed paper sources so the print dialog reflects your printer’s actual configuration.

How to Install

1. Check your Windows version. Open your PC’s system information to confirm the Windows edition and whether it uses a 32-bit or 64-bit architecture. Select a driver that lists compatibility with that configuration.
2. Download and extract the package. Save the appropriate Canon imageRUNNER 2520 printer driver to your computer. If it arrives as a compressed archive, extract it before starting installation.
3. Prepare the connection. For network printing, make sure the printer is powered on and reachable from your PC, and note its IP address if needed. For USB installation, follow the installer’s instructions about when to connect the cable.
4. Run the installer. Open the setup program, allow administrator access if prompted, and select the connection method. Choose the detected printer or enter its network address. If no setup program is included, use Windows’ Add printer option and browse to the extracted driver files.
5. Confirm settings and test. Review the paper size, available trays, and duplex preferences, then print a test page. If the printer does not respond, check the selected port and connection before reinstalling.

This page concerns printing support. Scanning functions may require separate Canon software, and available options can vary by driver package and Windows version.

Common Issues and Fixes

• Installation fails or stalls: Use the Canon UFR II driver package matching Windows architecture (32/64-bit), run setup as administrator, and clear paused print jobs. If it still fails, delete the existing imageRUNNER 2520 queue and reboot before reinstalling.
• Device not detected: Confirm the copier is on and reachable by ping, then create a Standard TCP/IP port using its current IP address. For USB, connect directly to a rear port with a known-good cable, not a hub.
• Driver/version conflicts: In Print Management, remove old Canon iR/UFR II driver packages and duplicate printer entries, restart the Print Spooler, then reinstall only the correct imageRUNNER 2520 driver.