The Canon imageRUNNER 2230 driver helps Windows communicate with this multifunction device for network printing. Installing a compatible Canon driver allows your computer to send print jobs and access the settings supported by your device configuration.

Key Features

• Network printing support: Connects Windows to the imageRUNNER 2230 over your local network, allowing users to print through a configured network port.
• Print settings access: Provides controls for options such as paper size, orientation, copy count, and print quality, depending on the selected driver.
• Device configuration: Helps Windows recognize available paper sources and supported accessories so print settings match the installed hardware.
• Windows compatibility options: When downloading for Windows 11, 10, 8, or 7, check the individual package details for operating system and architecture support. Older driver packages may not explicitly support every Windows version.

How to Install

1. Check your Windows system.

Confirm your Windows version and whether it uses a 32-bit or 64-bit architecture. Choose a package that lists compatibility with your system and the Canon imageRUNNER 2230.

1. Prepare the network connection.

Make sure the device is powered on and connected to the local network. Obtain its IP address from the device’s network settings or ask your network administrator.

1. Download and extract the driver.

Save the appropriate Canon driver package to your computer. If it comes as a compressed archive, extract the files before starting installation.

1. Add the device.

Run the included installer and follow its network setup prompts. If no installer is provided, use Windows printer settings to add a printer manually by IP address, then select the extracted driver when prompted. The driver must match the printing language supported by the device’s installed controller.

1. Confirm settings and test printing.

Open the printer’s properties, verify any available trays or accessories, and print a test page. If the job does not reach the device, check its IP address, printer port, and network accessibility before reinstalling.

For reliable results, use a driver intended for this model and your Windows environment rather than assuming that any Canon network driver will work.

Common Issues and Fixes

• Install fails or hangs: Run the Canon installer as administrator, remove any existing imageRUNNER 2230 drivers first, reboot, and temporarily pause antivirus during setup.
• Device not detected: Confirm USB or network connection; for network use, verify the printer’s IP address, same subnet, and correct TCP/IP port. Ping the imageRUNNER 2230 before reinstalling.
• Driver version conflicts: Uninstall old Canon UFR II/PCL drivers, clear stuck print jobs and restart the Print Spooler, then install the latest 32/64-bit driver matching Windows.