The Canon imageCLASS MF4570dn driver helps Windows communicate with your printer so you can send documents to print and adjust available printing options. Installing the appropriate Canon driver can also help resolve problems such as an unrecognized printer or missing settings.

Key Features

• Printer-specific controls: Access supported settings for paper size, orientation, print quality, and page layout rather than relying solely on a generic Windows driver.
• Automatic two-sided printing: Configure duplex printing for reports, handouts, and everyday documents to reduce paper use.
• USB and network connectivity: Set up printing through a direct USB connection or the printer’s Ethernet connection, depending on your workspace.
• Multifunction support: Use compatible Canon scanning drivers and utilities to access scanning features. These components may require a separate download from the printer driver.

How to Install

1. Check your Windows version. Before downloading, confirm whether your computer runs Windows 11, 10, 8, or 7 and check its system type. Choose a package explicitly compatible with your operating system and the Canon imageCLASS MF4570dn; older packages may not support every listed Windows version.

1. Prepare the printer connection. Turn on the printer and make sure it has paper loaded. For Ethernet setup, connect it to the same network as your computer. For USB installation, leave the cable disconnected until the installer asks you to connect it, unless the package instructions say otherwise.

1. Download and open the driver package. Save the compatible Canon installer, extract it if necessary, and launch the setup program. Approve the Windows permission prompt if it appears.

1. Follow the installation prompts. Select the connection method and choose your printer when it is detected. If a network search does not find it, check the Ethernet connection and use the printer’s IP address if the installer offers that option.

1. Verify printing and optional scanning. Print a test page from Windows printer settings, then review your paper and duplex preferences. If you need scanning, install the compatible scanning components and test them separately.

If setup fails, check the package’s compatibility notes before retrying. A driver intended for another Canon model or Windows version may install incorrectly or leave important features unavailable.

Common Issues and Fixes

• Install fails or stalls: Disconnect the USB cable before running the Canon MF4570dn setup. Remove any existing Canon MF drivers in Apps & Features and Print Management, restart, then run the UFR II LT installer as administrator and reconnect when prompted.
• Device not detected: For USB, try a rear port and a known-good cable. For Ethernet, confirm the printer’s IP on its status page, keep PC and printer on the same subnet, and add the printer by IP address.
• Driver version conflicts: Windows may assign a WSD/generic driver. Remove the device and delete old Canon driver packages in Print Management > All Drivers, then reinstall the Canon UFR II LT package and set it as default.