The Canon imageCLASS D1320 driver lets Windows communicate with your printer, so documents reach the device with the correct layout and print settings. Installing a compatible Canon driver can help resolve recognition issues and make the printer’s supported options available from your applications.

Key Features

• Reliable printer communication: Provides the software connection Windows needs to send print jobs to the Canon imageCLASS D1320 over a supported USB or network connection.
• Document layout controls: Gives you access to settings such as paper size, orientation, copy count, and page scaling when supported by the selected driver.
• Two-sided printing options: Allows you to configure automatic duplex printing for suitable documents, helping reduce paper use.
• Print quality adjustments: Offers supported output settings so you can choose an appropriate balance of text clarity and toner consumption.

How to Install

1. Check your Windows version. Before downloading, confirm whether your computer runs Windows 11, 10, 8, or 7. Check the system type as well, and select a package that explicitly supports your Windows version and architecture.

1. Choose the appropriate Canon package. Download the printer driver intended for the imageCLASS D1320. If you also need scanning functionality, check whether a separate scanner driver or utility is required; a printer-only package may not include it.

1. Prepare the connection. Turn on the printer and clear any errors shown on its display. For a network setup, make sure the printer and computer can communicate on the same network. For USB installation, follow the installer’s instructions about when to connect the cable.

1. Run the installer. Extract the downloaded files if necessary, then launch the setup program. Approve the Windows permission prompt, choose the connection method, and follow the instructions to locate or add the printer.

1. Verify the installation. Open Windows printer settings, select the Canon imageCLASS D1320, and print a test page. Review the paper and duplex settings before starting regular print jobs. Restart the computer if the installer requests it.

If the printer is not detected, check its connection and try the installation again. Avoid assuming that a driver for an older Windows release is compatible with Windows 11; use the operating-system support listed for the specific download.

Common Issues and Fixes

• Install fails or stalls: Disconnect the USB cable, close Canon setup, remove any failed D1320 entry in Devices and Printers, reboot, then run the Canon installer as administrator. Connect USB only when prompted.
• Device not detected: Use a direct rear USB port and a known-good cable; avoid hubs. Confirm the D1320 is powered on and ready. Check Device Manager for unknown USB/imaging devices, then reinstall the D1320 driver.
• Driver/version conflicts: Remove older Canon imageCLASS or UFR II drivers via Print Management and uninstall any existing scanner driver. Restart the print spooler, then install the latest D1320 package for your Windows version.