The Canon i SENSYS MF4750 driver lets Windows communicate with your multifunction laser printer, allowing applications to send print jobs and use the available device settings. Installing the appropriate Canon software can also enable scanning when the download includes a scanner driver or a separate scan package.

Key Features

• Reliable printing: Provides the connection between Windows applications and the MF4750, helping documents reach the printer with the correct settings.
• Print controls: Gives access to supported options such as paper size, orientation, copy count, and print quality.
• Scanning support: A compatible scanner driver allows supported software to capture paper documents digitally. Check whether scanning components are included or require a separate download.
• Device configuration: Helps Windows identify the printer correctly and makes its supported preferences available through the printer properties panel.

How to Install

1. Check your Windows version. Confirm whether you use Windows 11, 10, 8, or 7, and check your system architecture. Choose a package explicitly listed for your operating system and the Canon i SENSYS MF4750; compatibility can vary between driver releases.
2. Download the required components. Select the printer driver for printing. If you also need to scan, look for an included scanner component or a compatible separate scanner package.
3. Prepare the printer. Switch on the MF4750 and clear any paper or toner alerts. For a USB installation, leave the cable disconnected until the installer asks you to connect it, unless the package instructions say otherwise.
4. Run the installer. Extract the downloaded files if necessary, open the setup program, and approve the Windows permission prompt. Follow the on-screen instructions to select components and complete the connection.
5. Test the installation. Restart the computer if prompted, then open Windows printer settings and print a test page. If scanning software was installed, try a single-page scan to confirm that both functions work.

If Windows does not detect the printer, check the USB connection and confirm that the selected package matches your system. Avoid assuming that an older driver supports Windows 11 unless that compatibility is stated in the package documentation.

Common Issues and Fixes

• Install fails or hangs: Disconnect the MF4750’s USB cable before starting the Canon installer, run it as administrator, and remove any older Canon i-SENSYS/MF driver and scanner software first. Temporarily disable antivirus, reboot, then reconnect USB only when prompted.
• Device not detected: For USB, try a direct rear-port connection and a known-good cable; avoid hubs. For network, confirm the MF4750 has a valid IP on the same subnet, ping it, and add the printer by IP if auto-discovery fails. Restart the Print Spooler service.
• Driver/version conflicts: Uninstall previous Canon MF/UFR II drivers and scanner drivers using Canon’s uninstaller, delete leftover MF4750 queues in Devices and Printers, then install the correct 32/64-bit package for your Windows version. Do not mix old and new driver versions.