The Canon i SENSYS MF4690PL driver connects this multifunction laser printer to your Windows computer, allowing applications to send print jobs and use the available printing controls. Choosing a driver that matches your Windows version and system architecture helps prevent installation problems and keeps everyday document printing straightforward.

Key Features

• Windows printing support: Enables communication between your PC and the Canon i SENSYS MF4690PL so you can print documents from compatible applications.
• Document layout controls: Provides access to settings such as paper size, orientation, and copy count, with additional options depending on the installed driver.
• Output preferences: Lets you adjust supported print-quality and paper-handling settings to suit office documents, reports, and other routine work.
• Connection configuration: Supports printer setup through the connection methods covered by the selected driver package. Scanning and other multifunction features may require separate Canon software.

How to Install

1. Check your Windows system. Confirm whether you are running Windows 11, 10, 8, or 7, and identify your system architecture in Windows Settings or Control Panel. Driver availability can vary, so verify that the download explicitly supports your configuration.

1. Choose the appropriate Canon package. Select a driver listed for the Canon i SENSYS MF4690PL and your operating system. Review any compatibility notes before downloading, particularly if you use a newer version of Windows.

1. Prepare the printer connection. Turn on the printer and clear any errors shown on its display. For network installation, make sure the printer is reachable from your computer. If using USB, follow the installer’s instructions about when to connect the cable.

1. Run the installer. Extract the downloaded package if necessary, then launch its setup program. Allow administrator access when requested and follow the prompts to select the connection type and locate the printer.

1. Confirm the setup. Open the Windows printer settings, select the installed device, and print a test page. Check the default paper size and other printing preferences before sending your regular documents.

If installation fails, check the package’s supported operating systems and remove any incomplete printer entry before trying again. Do not assume that a driver intended for an older Windows release is compatible with Windows 11.

Common Issues and Fixes

• Install fails or stalls: Disconnect the USB cable, remove any older Canon i-SENSYS/MF drivers, run the installer as administrator, and reconnect the printer only when prompted.
• Device not detected: For USB, use a direct USB 2.0 port and a known-good cable. For network use, confirm the printer is on the same subnet, allow Canon setup through the firewall, or enter the printer’s IP address manually.
• Version conflicts or missing scanner: Uninstall previous UFR II/scan drivers and Canon MF Toolbox, reboot, then install the matching 32/64-bit package. If scanning still fails, re-register the MF4690PL in Canon’s scanner selector or test with WIA/TWAIN.