The Brother MFC 8810DW Printer driver allows Windows to communicate with your multifunction laser printer and gives you access to its printing settings. Choose a package that matches your Windows version and connection method to help avoid setup problems, missing options, or jobs stuck in the print queue.

Key Features

• Printer recognition: Helps Windows identify the Brother MFC 8810DW correctly and send print jobs using the appropriate device settings.
• Print controls: Provides access to supported options such as paper size, orientation, print quality, and automatic two-sided printing.
• Connection support: Enables printing through a supported USB or network connection, depending on the package selected and how the printer is configured.
• Multifunction software options: A full driver and software package may also include scanning components and Brother utilities. A print-only driver does not necessarily enable scanning.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7, then check its system architecture. Select a driver explicitly listed as compatible with your operating system; available packages and features can differ between versions.

1. Download the appropriate package. Use a Brother-provided driver for this exact model. Choose the full software package if you need its included multifunction tools, or a printer driver if you only require printing.

1. Prepare the printer connection. Turn on the printer and clear any errors shown on its display. For network installation, connect it to the same local network as your computer. For USB setup, leave the cable disconnected until the installer asks for it, unless the package instructions say otherwise.

1. Run the installer. Open the downloaded file, allow any required administrator permissions, and follow the prompts. Choose your connection type and select the correct printer when it appears. Restart Windows if requested.

1. Verify the installation. Open Windows printer settings and print a test page. Check paper and duplex preferences before printing documents. If you installed scanning software, test a scan separately to confirm that the scanning components are working.

If the printer is not detected, check the USB cable or network connection before repeating setup. When multiple entries appear in Windows, select the newly installed Brother MFC 8810DW queue to avoid sending jobs to an outdated configuration.

Common Issues and Fixes

• Install fails or hangs: Disconnect the USB cable during setup, uninstall older Brother MFC-8810DW software with Brother’s Uninstall Tool, reboot, then run the full driver package as administrator. Temporarily pause antivirus if it blocks the installer.
• Printer not detected: For USB, use a direct port and known-good cable, not a hub. For network, print the configuration page, reserve the printer’s IP, and re-add it as a Standard TCP/IP port on the same subnet.
• Driver/version conflicts: Remove duplicate MFC-8810DW entries in Print Management, install the Brother original driver rather than a generic Windows one, and set it as default. Reboot after Windows updates before reinstalling.