The Brother MFC 8680DN driver helps Windows communicate with your multifunction laser printer, enabling print jobs and access to supported device settings. When choosing a download for Windows 11, 10, 8, or 7, check that the package explicitly supports your Windows version and system architecture, as available features may vary by driver.

Key Features

• Printing controls: Adjust paper size, orientation, print quality, and other available preferences before sending documents to the printer.
• Automatic duplex settings: Access two-sided printing options supported by the Brother MFC 8680DN to reduce paper use for reports, forms, and everyday documents.
• USB and network connections: Set up printing through a direct USB connection or the printer’s wired Ethernet connection, using the appropriate driver and installation method.
• Scanning support with compatible software: A suitable multifunction package may include a scanner driver and utilities. A print-only download does not necessarily enable scanning, so review the package contents if you need both functions.

How to Install

1. Check your Windows system. Confirm whether your computer runs Windows 11, 10, 8, or 7, and identify whether it uses a 32-bit or 64-bit architecture. Choose a Brother driver that lists compatibility with that configuration.

1. Prepare the printer and connection. Turn on the Brother MFC 8680DN and make sure it is ready. For Ethernet installation, connect it to the same network as your computer. For USB setup, follow the installer’s instructions about when to connect the cable.

1. Download and open the installer. Save the compatible driver package, extract it if required, and launch the setup program. Allow administrator permission if Windows requests it.

1. Select the installation options. Follow the prompts, choose USB or network printing, and select your printer when it appears. If network discovery fails, check the connection and use the printer’s IP address if the installer offers that option.

1. Verify the setup. Restart the computer if prompted, then print a test page from Windows printer settings. Check duplex preferences and, if you installed scanner software, try a test scan.

If no package lists your Windows version, check Brother’s compatibility guidance rather than assuming an older installer will work. Windows may offer a basic printing driver, but advanced settings and scanning features can require additional supported software.

Common Issues and Fixes

• Install fails or stalls: Disconnect USB, run the Brother installer as administrator, and remove previous MFC 8680DN entries in Printers & scanners. If setup still fails, run Brother’s Uninstall Tool, restart the print spooler, then reinstall the full package matching Windows 32/64-bit.
• Device not detected: Confirm the MFC 8680DN is powered on. For USB, use a direct rear-port connection and another cable. For network, verify the printer’s IP, ping it, and add it by TCP/IP port; allow Brother software through Windows Firewall.
• Version conflicts: Uninstall old MFC 8680DN drivers before upgrading, avoid mixing basic and full driver packages, and prevent Windows Update from replacing the Brother driver mid-install.