The Brother MFC 7460DN Printer driver helps Windows communicate with your multifunction device, allowing applications to send print jobs and use the available printing settings. Installing the correct Brother software can also enable scanning functions when the selected package includes scanner support. Choose a download that matches your Windows version and system architecture before starting setup.

Key Features

• Print settings access: Adjust paper size, orientation, print quality, and other supported options through the Brother printing preferences.
• Automatic duplex printing: Use the printer’s two-sided printing capability to reduce paper use when producing reports, handouts, and everyday documents.
• USB and network connectivity: Configure printing over a direct USB connection or through the device’s wired Ethernet connection, depending on your workspace.
• Optional scanning support: A compatible full software package may include the scanner driver and utilities needed to scan documents to your computer.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7, and check whether it uses a 32-bit or 64-bit system. Review the download’s compatibility notes, as available packages and installation methods can differ between Windows versions.

1. Select the appropriate download. Choose a Brother MFC 7460DN Printer driver for printing, or a full driver and software package if you also need scanning tools. Do not assume that a package for an older Windows release supports Windows 11.

1. Prepare the connection. Turn on the printer. For Ethernet installation, connect it to the same local network as your computer. For USB installation, leave the cable disconnected until the installer requests it, unless the package instructions say otherwise.

1. Run the installer. Open the downloaded file, approve the Windows permission prompt, and follow the setup instructions. Select the correct connection type and choose your Brother device when it appears. Restart the computer if prompted.

1. Verify operation. Open Windows printer settings and print a test page. If scanning software was installed, try scanning a document as well. If the printer is not detected, check its cables, network connection, and selected printer port before repeating setup.

Common Issues and Fixes

• Install fails or stalls: Disconnect the USB cable until the installer prompts. Run the Brother MFC-7460DN full driver package as administrator, remove older Brother entries first, then reboot and reinstall.
• Device not detected: Confirm the printer is on. For USB, try another port/cable and restart the Print Spooler. For Ethernet, check the MFC-7460DN’s IP address and add it using a Standard TCP/IP port.
• Driver/version conflicts: Remove duplicate MFC-7460DN queues in Print Management and uninstall old Brother drivers before installing the latest package. Avoid mixing the Windows inbox driver with Brother’s full driver set.