The Brother MFC 5460CN USB Printer driver allows Windows to communicate with your printer and send documents with the correct print settings. When setting up this Brother multifunction device on Windows 11, 10, 8, or 7, choose a driver package that explicitly supports your operating system and system architecture.

Key Features

• USB printing support: Establishes the connection Windows needs to send print jobs to the Brother MFC 5460CN over a USB cable.
• Print preference controls: Provides access to supported settings such as paper size, media type, print quality, and color or grayscale output.
• Application integration: Makes the printer available through the standard print dialog in compatible Windows applications, including word processors, browsers, and PDF readers.
• Device-specific output handling: Helps translate documents and images into instructions the printer can process. Scanning and other multifunction features may require separate Brother software.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7, then check its system architecture. Driver compatibility can vary, particularly on newer Windows releases, so do not assume an older package will work.

1. Choose a compatible download. Select a Brother driver that specifically lists the MFC 5460CN and your Windows version. If no matching package is available, check Brother’s support guidance or Windows Update for a supported alternative.

1. Prepare the printer. Turn on the device and clear any visible printer errors. If you are using a Brother setup program, leave the USB cable disconnected until the installer asks you to connect it, unless the package instructions say otherwise.

1. Run the installation. Extract the downloaded files if necessary, launch the setup program, and follow the prompts. Connect the USB cable directly to your computer when requested, then allow Windows to finish detecting the printer.

1. Verify the setup. Open Windows printer settings, select the Brother MFC 5460CN USB Printer, and print a test page. If it does not print, check the selected printer queue, confirm the USB connection, and review any error messages before reinstalling.

For scanning, look for a compatible scanner driver or multifunction software package rather than assuming the print driver includes it.

Common Issues and Fixes

• Install fails or stops midway: Confirm the driver matches your Windows version and 32/64-bit architecture. Disconnect the USB cable during setup, run the installer as administrator, and let it prompt for connection. If it still fails, remove any previous Brother MFC-5460CN entries in Devices and Printers, reboot, then reinstall.
• Printer not detected over USB: Use a direct rear USB port, not a hub or front-panel port. Try a known-good USB 2.0 cable under 2 m, power-cycle the printer, and check Device Manager for unknown devices. Reconnect the cable only when the installer asks.
• Driver/version conflicts: Remove old or duplicate Brother printer drivers before installing the latest package. If Windows installs a generic driver, update it manually via Device Manager or Brother’s installer, then set the MFC-5460CN as default and print a test page.