The Brother HL 5440D driver connects your Windows computer to this monochrome laser printer, allowing applications to send print jobs with the correct settings. Installing a compatible Brother driver helps you access printing preferences such as paper size, print quality, and automatic two-sided printing.

Key Features

• Reliable print communication: Enables Windows applications to send documents to the Brother HL 5440D and use its printing functions.
• Automatic duplex settings: Provides controls for printing on both sides of the paper, helping reduce paper use for reports, drafts, and everyday documents.
• Paper and layout options: Lets you select supported paper sizes, choose a paper source, and adjust page orientation to match your document.
• Output quality controls: Offers print quality and toner-saving preferences where available in the selected driver package.

How to Install

1. Check your Windows version. Identify whether your computer runs Windows 11, 10, 8, or 7, and confirm the system architecture before choosing a download. Use a package that explicitly supports your Windows version; older driver packages may not support newer systems.
2. Download the appropriate driver. Select the Brother HL 5440D printer driver that matches your operating system. If several packages are listed, check their descriptions to distinguish a basic print driver from a package with additional utilities.
3. Prepare the printer. Load paper, make sure the toner cartridge is installed, and turn the printer on. For a USB installation, keep the cable disconnected until the installer asks you to connect it, unless the package instructions say otherwise.
4. Run the installer. Open the downloaded file, approve any Windows permission prompt, and follow the setup instructions. Connect the printer when requested and allow installation to finish.
5. Confirm printing works. Open the Windows printer settings, select the Brother HL 5440D, and print a test page. Review paper size and duplex preferences before sending your first document.

If the printer does not appear after setup, check the USB connection and restart the printer and computer. For missing duplex or quality options, confirm that Windows is using the intended Brother driver rather than a generic printer driver.

Common Issues and Fixes

• Install fails or stalls: Disconnect the HL-5440D USB cable, remove any existing Brother printer entries, reboot, then run the Brother installer as administrator. Reconnect USB only when prompted.
• Device not detected: Power-cycle the HL-5440D, try a different USB port/cable, and avoid unpowered hubs. Confirm the printer appears in Device Manager; if not, reinstall the Brother USB driver.
• Driver/version conflicts: Remove old Brother HL-5440D drivers and matching 32/64-bit package before installing. If Windows Update replaced the driver, roll it back in Device Manager or reinstall the official Brother HL-5440D driver.