The Brother HL 2240 Series driver allows Windows to communicate with your Brother laser printer and send print jobs using the appropriate settings. Installing a compatible driver helps you access paper options, adjust print quality, and resolve problems caused by a missing or incorrect printer driver.

Key Features

• Printer communication: Provides the software interface Windows needs to send documents to the Brother HL 2240 Series.
• Paper and layout controls: Gives you access to supported paper sizes, orientation, copy counts, and page layout settings through the printing preferences.
• Print quality options: Lets you select available resolution and toner-saving settings to suit everyday documents or sharper text output.
• Windows printing integration: Makes the printer available to applications that use the standard Windows print dialog, with job management handled through the print queue.

How to Install

1. Confirm your printer and Windows version. Check the model label before downloading. For Windows 11, 10, 8, or 7, verify that the selected driver explicitly supports your operating system and its architecture, such as 32-bit or 64-bit. Compatibility can vary between driver packages.
2. Download the matching driver. Choose a Brother driver package intended for your exact model. If the download is a compressed archive, extract its contents to a folder you can easily find.
3. Start the installer. Open the setup file and approve the Windows permission prompt if requested. Follow the instructions, leaving the USB cable disconnected until the installer asks you to connect it.
4. Connect and configure the printer. Turn on the printer, connect its USB cable when prompted, and allow setup to finish. The standard HL-2240 uses USB rather than built-in networking; if it is shared through another computer or a print server, follow that setup’s connection instructions.
5. Print a test page. Open the printer’s properties in Windows and select the test-page option. If printing fails, check the cable, confirm that the correct printer queue is selected, and restart the printer before trying again.

Common Issues and Fixes

• Install fails or stalls: Disconnect the HL-2240 USB cable, close the Brother installer, run the full driver package as administrator, and reconnect USB only when prompted. Avoid installing while Windows Update is also installing a printer driver.
• Device not detected: Use a known-good USB 2.0 cable directly into a rear motherboard port (no hub), power the printer on, then restart the Print Spooler service. Check Device Manager for unknown USB devices and try another port/cable.
• Driver/version conflicts: Remove old HL-2240 queues and drivers via Settings > Printers > Remove device and Print Management, restart Spooler, then reinstall the current Brother package. Don’t rely on a generic Windows Update driver if toner status features are needed.