The Brother HL 2130 driver enables Windows to communicate with your monochrome laser printer and send documents with the correct print settings. Installing the appropriate driver helps you access paper, layout, and print-quality options when printing everyday documents.

Key Features

• Reliable print communication: Allows Windows applications to send print jobs to the Brother HL 2130 through its USB connection.
• Paper and layout controls: Provides settings for supported paper sizes, page orientation, and document layout.
• Print-quality adjustments: Offers access to available resolution and toner-saving settings, depending on the driver package.
• Windows printing integration: Makes the printer available through standard print dialogs, so you can select it from office software, PDF readers, and other applications.

How to Install

1. Check your Windows version. Identify whether your computer runs Windows 11, 10, 8, or 7, and check its system type before choosing a download. Confirm that the selected package explicitly supports your operating system.
2. Download the matching driver. Choose a Brother driver package that lists the HL 2130 as a supported model. If the download is compressed, extract its contents before starting installation.
3. Run the installer. Open the setup file and approve the Windows permission prompt if requested. Follow the instructions, leaving the USB cable disconnected until the installer asks you to connect it.
4. Connect and configure the printer. Power on the Brother HL 2130, attach it directly to an available USB port, and allow setup to finish. Select it as your default printer if desired.
5. Print a test page. Open the printer’s properties in Windows and send a test page. If it does not print, check the USB connection, paper supply, and selected printer queue.

The Brother HL 2130 is a USB-connected model, not a printer with built-in Ethernet or Wi-Fi. For a printer shared through another computer, install the appropriate driver and configure Windows printer sharing separately.

Common Issues and Fixes

• Install fails or stalls: Disconnect the HL-2130 USB cable before running the Brother installer and connect it only when prompted. Run the installer as administrator and temporarily disable antivirus.
• Device not detected: This is a USB-only printer—use a direct USB 2.0 port and a known-good cable, not a hub. Power the printer on and restart the Print Spooler service.
• Driver/version conflicts: Remove existing HL-2130 and generic Brother printer entries, reboot, then install the latest full Brother driver package. Avoid mixing Windows Update drivers with Brother software.