The Brother DCP T700W Printer driver helps Windows communicate with your printer so you can send documents, adjust print settings, and manage everyday printing tasks. Choose a Brother package that matches your version of Windows 11, 10, 8, or 7; a full software package may also include tools for using the device’s scanning functions.

Key Features

• Print settings control: Access supported options such as paper size, media type, print quality, and color preferences to suit documents, schoolwork, or photos.
• USB and wireless setup: Configure the Brother DCP T700W for a direct USB connection or printing over a compatible Wi-Fi network, depending on the selected installer.
• Scanning support: Packages that include scanner drivers let compatible Windows applications communicate with the built-in scanner.
• Maintenance and status tools: Depending on the software included, view printer status and access utilities that help identify connection issues or maintain print quality.

How to Install

1. Check your Windows version. Confirm whether your PC runs Windows 11, 10, 8, or 7, and check its system type where applicable. Select a driver explicitly listed for your operating system rather than assuming every package supports all versions.

1. Download the appropriate Brother package. Choose the full driver and software package if you need both printing and scanning, when available. A printer-only driver may be sufficient if you only want to print.

1. Prepare the printer and connection. Turn on the Brother DCP T700W and load paper. For wireless installation, connect the printer and computer to the same local network. If using USB, leave the cable disconnected until the installer requests it.

1. Run the installer. Open the downloaded file, allow the setup program to make changes if prompted, and follow the instructions. Select your connection method and choose the correct printer when it appears.

1. Verify the installation. Restart Windows if requested, then print a test page from the printer settings. If you installed scanning software, try a scan as well. If the device is not detected, check the USB cable or network connection before running setup again.

Common Issues and Fixes

• Install fails or stalls: Disconnect the DCP-T700W, run Brother’s uninstall tool, reboot, then install the full driver package as administrator. Reconnect only when the installer prompts.
• Printer not detected: Confirm the PC and DCP-T700W are on the same 2.4 GHz Wi-Fi network. Print a network configuration report, reserve the printer’s IP, then add it manually by IP if auto-discovery fails. For USB, try a direct rear port and a known-good cable.
• Driver/version conflicts: Remove old DCP-T700W print queues and Brother software, clear the print spooler, and reinstall the latest full package. Avoid the generic Windows driver if scanning or ink status is needed.