The Brother DCP 350C driver allows Windows to communicate with this all-in-one inkjet printer for everyday printing and, when included in the package, scanning. Installing the appropriate Brother software helps make the device’s available settings accessible from your computer.

Key Features

• Printer communication: Enables compatible Windows applications to send documents and images to the Brother DCP 350C over its USB connection.
• Print settings: Provides access to supported options such as paper size, media type, print quality, and color output.
• Scanning support: A package that includes a scanner driver allows compatible software to capture documents and photos from the flatbed scanner.
• Device configuration: Helps Windows identify the printer correctly and use the functions supported by the selected driver package.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7, and check its system type where relevant. This is an older device, so do not assume one download supports every listed operating system.
2. Select a compatible package. Review the driver’s compatibility information before downloading. Choose a full software package if you need scanning features as well as printing, provided one is available for your version of Windows.
3. Prepare the connection. Turn on the Brother DCP 350C. For a guided USB installation, leave the USB cable disconnected until the installer asks you to connect it, unless the package instructions say otherwise.
4. Run the installer. Open the downloaded file, approve any Windows permission prompt, and follow the setup instructions. Connect the printer when requested and allow installation to finish.
5. Test the device. Print a test page from Windows printer settings. If you installed scanning software, scan a document to confirm that both functions work.

If no compatible installer is available for your Windows version, check Brother’s support information and Windows Update for supported alternatives. A basic Windows printer driver may offer fewer features than a full Brother package, and an older installer is not guaranteed to work on Windows 11.

Common Issues and Fixes

• Install fails or stalls: Disconnect the USB cable before running the Brother installer. Run setup as administrator, let it prompt for the USB connection, and temporarily disable antivirus if it blocks the driver files.
• Device not detected: Connect the DCP-350C directly to a rear USB port, not a hub. Check power and cable, then reinstall the full Brother package—including the scanner driver—so print and scan are both recognized.
• Version conflicts: Remove older Brother DCP-350C or other Brother inkjet drivers using Brother’s Uninstall Tool, reboot, then install the correct 32/64-bit driver for your Windows version. Avoid mixing the Windows generic driver with Brother software if scanning is needed.