The Brother DCP 1622WE driver helps Windows communicate with your multifunction printer for everyday printing and scanning. For a wireless setup, the appropriate Brother driver allows your PC to work with the device over your local network rather than relying on a direct USB connection. Choose a package that matches your version of Windows 11, 10, 8, or 7 before downloading.

Key Features

• Network printing support: Connects Windows applications to the Brother DCP 1622WE on your wireless network, so you can send documents to the printer from a compatible PC.
• Print settings access: Provides controls for options such as paper size, orientation, and print quality, helping you prepare documents for the intended output.
• Scanning functionality: An appropriate scanner driver enables compatible Windows software to receive scans from the device. Some downloads include both printing and scanning components; others provide them separately.
• Device configuration: Brother installation software, when included, helps locate the printer and configure the connection, reducing the need to enter network settings manually.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7, and check its system type where applicable. Select the Brother DCP 1622WE download listed for that operating system.
2. Prepare the connection. Turn on the printer. For wireless installation, connect it to the same local network as your PC using the device’s setup instructions. If installing through USB, wait to connect the cable until the installer requests it.
3. Run the downloaded installer. Open the setup file, approve the Windows permission prompt if shown, and follow the installation instructions. Choose the printing and scanning components you need if the package offers a selection.
4. Select your device. Choose the wireless/network or USB connection option as appropriate. For a network setup, select the detected printer; if it does not appear, check its connection and confirm that your PC can reach the same network.
5. Verify operation. Finish setup and restart Windows if prompted. Print a test page, then try a scan if you installed scanning support.

If an older installation causes problems, remove the unused printer entry or outdated driver before reinstalling the matching package.

Common Issues and Fixes

• Install fails or stops midway: Disconnect the USB cable and power off the DCP-1622WE before starting Brother’s installer. Run it as administrator, then connect/power on only when prompted. Remove any partial install from Apps & Features first.
• Device not detected (USB/Wi‑Fi): For USB, try another port/cable and avoid hubs. For Wi‑Fi, confirm the printer and PC are on the same 2.4 GHz network (this model does not support 5 GHz), then re-run wireless setup.
• Version conflicts/old driver remains: Uninstall existing Brother DCP-1622WE software and drivers, reboot, and install the latest full driver package from Brother support. Avoid mixing Windows Update and Brother packages.