The Brother DCP 115C Printer driver allows Windows to communicate with your all-in-one device, enabling print jobs and access to available printer settings. Installing the appropriate Brother software can also support scanning when the package includes a compatible scanner driver. Before downloading for Windows 11, 10, 8, or 7, check the package details carefully, as this older model may not have a dedicated driver for every Windows version.

Key Features

• Printer communication: Provides the software connection needed to send documents and images from Windows applications to the Brother DCP 115C.
• Print settings: Gives access to supported options such as paper size, media type, print quality, and color or grayscale output.
• Scanning support: A package that includes the scanner driver can enable compatible applications to capture documents and photos from the flatbed scanner.
• Device configuration: Helps Windows identify the printer correctly so you can select it in applications and manage its printing preferences.

How to Install

1. Check your Windows version. Confirm whether your PC runs Windows 11, 10, 8, or 7, and check its system type. Choose a driver explicitly listed as compatible with your operating system and architecture; do not assume an older package supports a newer version.

1. Download the appropriate package. Select the Brother DCP 115C driver that matches your needs. If you plan to scan as well as print, check whether scanner software is included or requires a separate download.

1. Prepare the printer. Turn on the device and make sure it has paper and ink. If you are using a Brother installer, leave the USB cable disconnected until instructed otherwise, unless the package instructions say to connect it first.

1. Run the installation. Extract the downloaded files if necessary, launch the installer, and follow the on-screen prompts. Connect the USB cable when requested. If the download contains only driver files, follow its manual installation instructions through Windows printer settings.

1. Verify operation. Restart Windows if prompted, select the Brother DCP 115C in your printer list, and print a test page. If scanner software was installed, try a scan from a compatible application to confirm that both functions work.

Common Issues and Fixes

• Install fails or stalls: Disconnect the DCP-115C USB cable before starting setup. Close antivirus temporarily, run the Brother installer as administrator, and reconnect the cable only when prompted.
• Device not detected: Use a known-good USB 2.0 cable and a rear direct port, not a hub. Power-cycle the DCP-115C, remove other USB printers, then reinstall the driver.
• Driver version conflicts: Windows may keep an older Brother or generic driver. Remove all DCP-115C entries in Printers & scanners, restart, then install the correct full Brother package for your Windows version.