The Bixolon SRP 350III driver helps Windows communicate with your receipt printer, allowing compatible point-of-sale software to send print jobs correctly. For a network-connected setup, choose a Bixolon driver package that supports your printer’s interface and your version of Windows 11, 10, 8, or 7.

Key Features

• Windows printing support: Makes the printer available to compatible applications through the Windows printing system.
• Network connection setup: Allows a properly configured Ethernet-equipped printer to receive jobs through a Windows network printer port.
• Receipt layout controls: Provides access to supported settings such as paper width, orientation, and print preferences so receipts fit your application’s layout.
• Device-specific options: Depending on the driver package and installed hardware, may expose controls for receipt cutting and a connected cash drawer.

How to Install

1. Check your printer and Windows version. Confirm that the model is the Bixolon SRP 350III and identify whether your Windows installation is 32-bit or 64-bit. For network use, verify that your printer has an Ethernet interface.

1. Download the matching driver. Select a Bixolon package that explicitly supports your model and operating system. Extract the downloaded archive if necessary, then review any included installation instructions.

1. Prepare the network connection. Turn on the printer and connect it to your local network. Find its assigned IP address using the printer’s network information or your router’s device list. Your PC must be able to reach that address.

1. Run the installer. Follow the setup prompts and select the appropriate connection method. If asked, enter the printer’s IP address or create a Standard TCP/IP port in Windows. Allow the installation to finish before opening your POS software.

1. Configure and test printing. Open the printer’s Windows preferences, select the appropriate receipt settings, and print a test page. Then choose the newly installed printer in your POS application and check a sample receipt for correct width, alignment, and cutting behavior.

If printing fails, check the IP address and selected port before reinstalling the driver. A changed network address or an offline printer can prevent output even when the driver is installed correctly.

Common Issues and Fixes

• Install fails or setup stops: Confirm you downloaded the SRP-350III driver for your exact Windows version and 32/64-bit architecture. Run the installer as administrator and close other Bixolon utilities before retrying.
• Device not detected: Check printer power and self-test, then verify the USB/serial cable and port. In Device Manager, look for an unknown device; for USB models, install the driver before reconnecting the printer. For serial models, confirm the correct COM port and baud rate.
• Version conflicts: Uninstall older Bixolon drivers and remove stale SRP-350III print queues via Print Management, reboot, then install the latest driver. Do not use SRP-350plusIII or generic receipt-printer drivers unless Bixolon explicitly recommends them.