The Dell 2355dn driver helps Windows communicate with your network-connected multifunction printer, translating print jobs into instructions the device can process. Installing a compatible Dell driver can resolve missing printer options, incorrect output settings, or connection problems caused by a generic driver.

Key Features

• Network printing support: Connects Windows applications to the Dell 2355dn over your local network so you can send documents to a shared office printer.
• Device-specific print settings: Provides access to supported options such as paper size, tray selection, print quality, and two-sided printing.
• Better job handling: Helps Windows submit print jobs using the correct printer language and configuration.
• Flexible installation: Allows you to configure the printer through network discovery or its IP address, depending on the installer and your network setup.

How to Install

1. Check your Windows version. Identify whether you are using Windows 11, 10, 8, or 7, and check whether your system is 32-bit or 64-bit. Select a driver package that explicitly supports your Windows version and architecture; older packages may not support every listed system.
2. Prepare the printer. Turn on the Dell 2355dn and connect it to your router or network switch. Make sure your computer can reach the printer on the same network. Note the printer’s IP address if automatic discovery is unavailable.
3. Download and extract the driver. Save the compatible package to your computer. If it arrives as a compressed archive, extract it before starting installation.
4. Run the setup program. Approve the Windows administrator prompt, choose a network connection when offered, and select the detected printer. If necessary, add it manually using its IP address.
5. Confirm the configuration. Open the printer’s properties in Windows, review the available paper and duplex settings, and print a test page.

This download is intended for printer communication. Scanning and other multifunction features may require separate Dell software rather than the print driver alone.

Common Issues and Fixes

• Install fails or stalls: Remove existing Dell 2355dn entries in Printers & scanners, then run the installer as administrator. If Windows blocks the package, download the latest Dell 2355dn driver for your exact OS and architecture instead of using a generic driver.
• Printer not detected: For USB, use a direct rear port and a known-good cable. For Ethernet, confirm the 2355dn’s IP address and add it as a TCP/IP port; make sure the PC and printer are on the same subnet.
• Print/scan version conflicts: Uninstall older Dell 2355dn print and scan drivers before installing a new package, then restart. If scanning fails after a Windows update, reinstall the Dell 2355dn scanner driver and select the correct model, not a compatible Dell MFP.