The Canon MF654CDW driver enables Windows to communicate with your printer and provides access to settings such as paper size, print quality, and color output. Installing the appropriate Canon package helps you configure the device for everyday document printing and avoid relying on limited generic printer settings.

Key Features

• Printer-specific controls: Adjust page layout, paper selection, color or monochrome output, and other options available for the Canon MF654CDW.
• Two-sided printing settings: Configure duplex printing for compatible jobs to reduce paper use and keep multipage documents organized.
• Connection setup: Add the printer through a supported USB or network connection, depending on your installation and the selected driver package.
• Windows integration: Make the printer available to Windows applications and manage printing preferences through the operating system’s printer settings.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, Windows 10, Windows 8, or Windows 7, and identify its system architecture. Choose a Canon MF654CDW driver explicitly listed for that combination; compatibility can vary by package, especially on older Windows versions.

1. Download the appropriate package. Select the printer driver that matches your system and connection method. If you also need scanning, check whether the download includes scanner support or whether a separate Canon scanner driver and utility are required.

1. Prepare the printer. Turn on the Canon MF654CDW and load paper. For a network installation, connect the printer and computer to the same accessible network. If using USB, follow the installer’s instructions about when to attach the cable.

1. Run the installer. Open the downloaded file, allow administrator access if prompted, and follow the setup instructions. Select the correct printer when detected, or use the available manual network setup option if automatic discovery fails.

1. Verify the installation. Open Windows printer settings and print a test page. Review paper size, color preferences, and duplex settings before sending your first regular print job.

If setup does not detect the printer, check its connection and network address before trying again. For an older Windows system, verify that Canon provides a compatible package rather than attempting to install a driver intended for a newer release.

Common Issues and Fixes

• Install fails or stalls: Disconnect the USB cable, remove any existing Canon MF654CDW printer entry and old Canon drivers, then run the installer as administrator. Reconnect USB only when prompted; for network installs, confirm the printer’s IP and port.
• Device not detected: Verify the MF654CDW is on the same network/subnet, print a configuration page for its IP, or try a direct USB 2.0 port and known-good cable. If needed, add the printer manually by IP using the Canon UFR II driver.
• Driver/version conflicts: Uninstall older Canon MF/generic drivers, reboot, and install the latest MF654CDW UFR II driver from Canon. Avoid Windows generic drivers if print or scan features are missing; re-add the printer port after updating.