The Canon iR2870 driver connects this office multifunction printer to your Windows PC, allowing applications to send print jobs with the correct settings. Installing a suitable Canon driver helps you access the printer’s available paper-handling and output options instead of relying on basic generic controls.

Key Features

• Printer-specific settings: Adjust paper size, orientation, copy count, and other print preferences through the Windows printing interface.
• Duplex and layout controls: Use two-sided printing and multiple-page layouts when supported by the selected driver and device configuration.
• Paper source selection: Choose available trays and match paper settings to the document you are printing.
• Accessory configuration: Configure installed finishing or paper-handling accessories so their supported options appear in print preferences.

How to Install

1. Check your Windows version and system type. Before downloading, confirm whether your computer runs Windows 11, 10, 8, or 7 and whether it requires a 32-bit or 64-bit driver. Check the package’s compatibility details, as older Canon iR2870 drivers may not explicitly support newer Windows releases.

1. Select a compatible driver package. Choose a Canon driver that lists the iR2870 and matches your operating system. If several driver types are offered, select one supported by your printer’s configuration; ask your network administrator if you are unsure.

1. Prepare the printer connection. Turn on the printer and confirm that it is ready. For a network installation, make sure your PC can reach the printer and note its IP address. If using a supported USB connection, follow the installer’s instructions about when to connect the cable.

1. Run the installer. Extract the downloaded package if necessary, then open its setup program and follow the prompts. If no installer is included, use Windows printer setup to add the device and browse to the extracted driver files when asked.

1. Review settings and test printing. Open the printer’s properties, confirm any installed trays or accessories, and print a test page. If printing fails, check the selected port, network address, and driver compatibility before reinstalling.

A printer driver does not necessarily enable every multifunction feature. Scanning or fax functions, where available, may require separate software and additional configuration.

Common Issues and Fixes

• Install fails or rolls back: Remove existing Canon iR2870/UFR II drivers, run setup as administrator, and match the package to Windows architecture. Temporarily disable antivirus if it blocks the print spooler.
• Device not detected: Verify the copier’s IP is reachable, then create a Standard TCP/IP port manually and assign the correct iR2870 PCL/UFR II driver. For USB, try another port/cable and power-cycle the printer.
• Driver/version conflicts: Uninstall older Canon iR-series print and scan entries, restart the print spooler, then install only one driver package. If printing breaks after an update, roll back the iR2870 driver in Device Manager.