The Canon IR5050 driver allows Windows to send print jobs to this network-connected multifunction device and display the printing options available for its configuration. Selecting a compatible driver helps your computer communicate with the printer and apply settings such as paper size, duplex printing, and output preferences.

Key Features

• Network printing support: Connects Windows applications to the Canon IR5050 over your local network so you can print without a direct USB connection.
• Document layout controls: Provides access to supported settings for paper selection, orientation, scaling, and double-sided output.
• Device configuration options: Lets you configure installed paper trays and compatible finishing accessories, where supported by the driver.
• Consistent print preferences: Allows you to save default settings for everyday documents while adjusting individual jobs when needed.

How to Install

1. Check your Windows version. Identify whether you are using Windows 11, 10, 8, or 7, and confirm your system architecture. Choose a Canon IR5050 driver package that explicitly supports your setup.
2. Prepare the network connection. Turn on the printer and ensure your PC can reach it on the network. If necessary, obtain the printer’s IP address from its network settings or your administrator.
3. Download and extract the driver. Save the compatible package to your computer. If it is compressed, extract its contents before starting installation.
4. Run the installer. Follow the prompts to add a network printer. If automatic discovery does not find the device, enter its IP address when prompted or use Windows’ manual printer setup and select the extracted driver.
5. Confirm settings and test. Check that the installed trays and accessories match the physical device, then print a test page. If the job does not print, verify the selected printer port and network address before reinstalling.

For shared office environments, ask your administrator whether to connect directly to the Canon IR5050 or through a print server. Using the intended connection method can help avoid duplicate printer entries and mismatched defaults.

Common Issues and Fixes

• Installation fails or stalls: Run the Canon IR5050 driver installer as administrator, match the driver (UFR II/PCL) to your Windows version and architecture, and temporarily pause antivirus. For USB installs, connect the cable only when the installer prompts.
• Device not detected: For network models, confirm the IR5050 has a valid IP on the same subnet and ping it; check firewall/SNMP settings. For USB, use a direct rear port and a known-good cable, not a hub.
• Old driver/version conflicts: Remove the existing IR5050 print queue and any older Canon UFR II/PCL driver in Print Management > Print Server Properties before installing. Reboot and re-add the printer with the new driver.