The Canon iR ADV 400 500 UFR II driver allows Windows to communicate with a compatible Canon imageRUNNER ADVANCE printer and process print jobs using Canon’s UFR II printing system. For network-connected devices, it helps you access the printer from your PC and choose the print settings available on your model. Select a driver package that explicitly supports your version of Windows 11, 10, 8, or 7.

Key Features

• UFR II print support: Processes documents through Canon’s UFR II driver interface for output on compatible printers.
• Network printing: Enables printing to a compatible Canon device over your local network when the printer’s address and connection are configured correctly.
• Document settings: Provides controls for options such as paper size, orientation, copy count, and print layout.
• Device-specific options: Can expose supported features such as two-sided printing, paper tray selection, and finishing controls, depending on the printer’s hardware and configuration.

How to Install

1. Check compatibility. Confirm that the Canon iR ADV 400 500 UFR II package lists your printer model and Windows version. Match the download to your system architecture, such as 32-bit or 64-bit, where applicable.
2. Prepare the network connection. Turn on the printer and make sure your computer can reach it over the network. If automatic discovery is unavailable, find the printer’s IP address in its network settings or ask your network administrator.
3. Download and extract the driver. Save the compatible package to your PC. If it is compressed, extract its contents before starting installation.
4. Run the installer. Open the setup program and approve the Windows permission prompt if requested. Choose the network connection option, then select the detected printer or enter its IP address. If no installer is included, use Windows printer settings to add the device and browse to the extracted driver files.
5. Confirm settings and test. Open the installed printer’s properties, check that available trays and accessories are configured correctly, and print a test page. If the job does not print, verify the printer’s network address and selected port before reinstalling.

Using a package matched to both your Canon device and operating system helps avoid compatibility errors and missing print options.

Common Issues and Fixes

• Install fails or rolls back: Run the Canon setup as administrator and use the UFR II package for your Windows architecture (32/64-bit). Remove failed Canon iR ADV 400/500 queues in Print Management, then retry.
• Device not detected: For USB, try another port/cable and power-cycle the printer. For network, verify the copier’s IP/subnet and enable RAW port 9100 or LPD; add a Standard TCP/IP port manually if discovery fails.
• Driver/version conflicts: Uninstall older Canon UFR II/UFR II LT drivers and printer objects, restart Print Spooler, then install one version. Avoid mixing PCL/PS and UFR II queues for the same device.