The Canon imageRUNNER 2020i driver allows Windows to communicate with the printer and send documents using the appropriate print settings. Choosing a compatible driver helps you access the options available on your device and avoid problems caused by an incorrect printer configuration.

Key Features

• Reliable print communication: Converts output from Windows applications into instructions the Canon imageRUNNER 2020i can process.
• Document layout controls: Provides settings such as paper size, orientation, copy count, and page layout, depending on the driver package.
• Paper and finishing configuration: Lets you configure supported paper sources and available device options so printing preferences match your installed hardware.
• Windows printing integration: Makes the printer accessible through standard print dialogs and Windows printer settings for everyday document workflows.

How to Install

1. Check your Windows version and architecture. Confirm whether your computer runs Windows 11, 10, 8, or 7, and whether it uses a 32-bit or 64-bit system. Driver availability can vary for this older model, so verify that the package explicitly supports your Windows version before downloading.

1. Select the appropriate Canon driver. Choose a package that lists the imageRUNNER 2020i as a supported device. If multiple driver types are offered, consult the package documentation to confirm which one matches your printer’s configuration.

1. Prepare the printer connection. Turn on the printer and check its connection to your computer or network. For network installation, have the printer’s IP address ready; for a direct connection, follow the installer’s instructions on when to connect the cable.

1. Run the installer. Extract the downloaded files if necessary, then launch the setup program and approve any administrator prompt. Follow the on-screen instructions to select the printer and connection method. If no setup program is included, use the Windows Add Printer wizard to locate the extracted driver files.

1. Confirm the setup with a test page. Open the printer’s properties, review its paper and device settings, and print a test page. If printing fails, check the selected port, connection, and driver compatibility before reinstalling.

A driver does not necessarily enable every function of a multifunction device. Scanning or other features may require separate compatible software, so review the package contents if you need more than printing.

Common Issues and Fixes

• Install fails or stalls: Disconnect the USB cable, run the Canon setup as administrator, and install the UFR II driver before reconnecting. If Windows blocks it, check Driver Signature Enforcement and use the latest signed package from Canon.
• Device not detected: Confirm the imageRUNNER 2020i is on the same network/subnet and note its correct IP address; for USB, try a direct rear-port connection and a known-good cable. Add the printer manually using the Standard TCP/IP port if auto-discovery fails.
• Version conflicts: Remove older Canon imageRUNNER drivers and leftover print queues via Print Management, restart the PC, then install only the current UFR II driver. Avoid mixing PCL and UFR II drivers for the same queue.