The Canon imageRUNNER 1310 driver allows Windows to communicate with the printer and send documents in a format it can process. Installing a compatible driver helps you access printing preferences and resolve problems such as the device appearing as an unknown printer or failing to receive print jobs.

Key Features

• Windows printing support: Connects your applications to the Canon imageRUNNER 1310 so you can print documents through the standard Windows print dialog.
• Print preference controls: Provides access to settings such as paper size, orientation, and copy count, depending on the driver package.
• Print job handling: Works with the Windows print queue, where you can check job status, pause printing, or cancel unwanted documents.
• Device configuration: Helps Windows identify the printer and apply the available settings for your connection and installed hardware.

How to Install

1. Check your Windows version. Before choosing a download for Windows 11, 10, 8, or 7, confirm your operating system and whether it uses a 32-bit or 64-bit architecture. This is an older printer, so verify that the specific driver package supports your system; native drivers may not be available for every listed Windows version.

1. Download a compatible driver. Select the Canon imageRUNNER 1310 package that matches your Windows installation. Review any included compatibility notes rather than assuming that a driver for another Canon model will work.

1. Prepare the printer. Turn on the device, load paper, and make sure it shows no error condition. If the installer requires the printer to remain disconnected until prompted, follow that instruction.

1. Run the installation. Extract the downloaded files if necessary, then launch the setup program and follow its prompts. If the package has no installer, use Windows printer settings to add the printer manually and browse to the supplied driver files when requested.

1. Confirm successful printing. Open the printer’s properties and print a test page. Check the selected port and paper settings if the page does not print correctly, and restart Windows if the installation instructions request it.

For the best results, use a driver explicitly intended for the Canon imageRUNNER 1310 and your Windows version. If installation fails, check the package’s documentation for supported connection methods and any additional setup requirements.

Common Issues and Fixes

• Install fails or rolls back: Use the exact Canon imageRUNNER 1310 driver package for your Windows architecture (32-bit vs 64-bit). Run setup as administrator, close other printer installs, and restart the Print Spooler (`net stop spooler` / `net start spooler`) before retrying.
• Device not detected: Confirm the iR 1310 is powered on and connected. For network models, verify the IP address is on the same subnet, ping it, then add a Standard TCP/IP port manually and select the installed imageRUNNER 1310 driver.
• Version/port conflicts: Remove older Canon iR 1300-series drivers and stale TCP/IP or USB ports in Print Management, restart the spooler, then install one matching driver version. On shared printers, avoid mixing 32-bit and 64-bit point-and-print drivers.