The Canon ImageRunner 2018 driver lets Windows communicate with your Canon multifunction printer, helping applications send documents with the correct print settings. For a network-connected setup, the appropriate driver and printer port allow your PC to reach the device and submit print jobs.

Key Features

• Windows printing support: Enables compatible applications to send documents to the Canon ImageRunner 2018 using a driver designed for its printing capabilities.
• Network printer setup: Works with a configured network connection so users can access the printer through its IP address or a shared print queue, depending on the installation.
• Print preference controls: Provides access to settings such as paper size, orientation, copy count, and supported paper sources. Available options depend on the driver package and installed hardware.
• Device configuration: Lets you review supported printer options and align the Windows print queue with the actual device configuration.

How to Install

1. Check your Windows version and system type. Before downloading, confirm whether you use Windows 11, 10, 8, or 7 and whether your system requires a 32-bit or 64-bit package. Compatibility can vary between driver releases, so verify that the selected package explicitly supports your operating system.

1. Prepare the printer connection. Turn on the Canon ImageRunner 2018 and confirm that its network connection is working. For an IP-based installation, obtain the printer’s current IP address from its network settings or ask your network administrator.

1. Download and extract the correct driver. Choose a Canon package that lists this model and matches your Windows installation. If the download is compressed, extract it to an accessible folder before starting setup.

1. Install and select the device. Run the included installer and follow its prompts. If no installer is provided, use Windows’ Add Printer option, add the printer by its network address, and browse to the extracted driver files when prompted.

1. Verify settings and print a test page. Open Printer Properties, check the selected port and device options, then print a Windows test page. If the printer appears offline, confirm its IP address and network availability before reinstalling.

A print driver does not necessarily enable scanning or other multifunction features. Those functions may require separate software and compatible device options.

Common Issues and Fixes

• Install fails or hangs: Stop the Print Spooler service, remove partial Canon ImageRunner 2018 entries in Print Management, then run the UFR II/PCL setup as administrator. Use the correct 32-/64-bit package for Windows.
• Device not detected: For USB, connect directly to the PC, not a hub, and try another port. For network, confirm the copier’s IP and subnet, then create a Standard TCP/IP port; enable SNMP if discovery fails.
• Driver version conflicts: Uninstall older Canon iR drivers and delete stale printer ports before installing the new package. Do not mix UFR II and PCL drivers for the same queue; reboot after removal.