The Brother MFC T910DW driver helps Windows communicate with your multifunction printer, enabling print jobs and supported scanning features to work correctly. For a network setup, the appropriate Brother software also helps your computer find and use the device over Wi-Fi or Ethernet.

Key Features

• Network printing support: Connects Windows to the Brother MFC T910DW on your local network, allowing you to send documents without a direct USB connection.
• Printer-specific settings: Provides access to supported options such as paper size, print quality, color preferences, and automatic two-sided printing.
• Scanning functionality: With the appropriate scanner driver or full software package installed, you can scan documents from the multifunction device to your computer.
• Windows compatibility: Driver packages are available for supported versions of Windows 11, 10, 8, and 7. Choose the download that matches your operating system and system architecture where applicable.

How to Install

1. Check your Windows version. Open your computer’s system information to confirm the Windows edition and whether it uses a 32-bit or 64-bit system. Select a Brother MFC T910DW driver package that explicitly supports that configuration.

1. Prepare the network connection. Turn on the printer and connect it to your router using Wi-Fi or an Ethernet cable. Make sure your computer is on the same local network; guest networks may prevent devices from communicating.

1. Download and run the installer. Save the appropriate Brother driver package, open it, and allow administrator access if prompted. If you need both printing and scanning, choose a package that includes the required components.

1. Select the printer. Follow the setup prompts and choose the network connection option when offered. Select your device from the discovered printers. If it does not appear, verify its network connection and use its IP address if the installer supports manual discovery.

1. Verify the setup. Complete installation, restart Windows if requested, and print a test page. If you installed scanning software, try a sample scan as well. Check that the correct printer is selected before sending your first document.

Common Issues and Fixes

• Install fails or stalls: Run the Brother MFC-T910DW full driver/software package as administrator, close other Brother apps, and temporarily pause antivirus. Connect USB only when prompted; for wireless, let the installer configure Wi-Fi rather than pre-pairing.
• Device not detected: Confirm the MFC-T910DW is on the same 2.4 GHz Wi-Fi network—it does not support 5 GHz. Print a network configuration report and use a fixed IP if needed. For USB, try a known-good cable and rear USB port, then restart PC and printer.
• Driver/version conflicts: Uninstall older Brother MFC drivers and scanner/fax software, reboot, restart the Print Spooler service, then install the latest full package. Avoid mixing the Windows inbox driver with Brother scanner/fax drivers.