The Brother MFC T810W driver helps Windows communicate with your multifunction printer, enabling print jobs and supported scanning functions over a network connection. Choose the appropriate Brother driver package for Windows 11, 10, 8, or 7 to access the device’s available settings and get it ready for everyday use.

Key Features

• Network printing support: Connects your Windows computer to the Brother MFC T810W on your local network, so you can send documents without a direct USB connection.
• Print settings control: Provides access to options such as paper size, media type, print quality, and color preferences to match your document requirements.
• Scanning integration: Compatible packages that include scanner drivers allow supported Windows applications to communicate with the device’s scanner.
• Device identification: Helps Windows recognize the printer correctly instead of relying solely on a generic driver, making model-specific options available where supported.

How to Install

1. Check your Windows version. Open your computer’s system information to confirm whether you use Windows 11, 10, 8, or 7. Also check whether your installation is 32-bit or 64-bit, then select a matching driver package.
2. Prepare the network connection. Turn on the Brother MFC T810W and connect it to your local network using its network setup controls. Make sure your computer is on the same network and can reach other local devices.
3. Download and launch the installer. Save the compatible Brother driver package, open it, and approve the Windows permission prompt if requested. If the download is compressed, extract its contents first.
4. Select the connection method. Follow the setup prompts and choose the network option when offered. Select your printer from the detected devices. If it does not appear, check its network status and use its IP address if the installer supports manual discovery.
5. Verify operation. Complete setup, restart Windows if prompted, and print a test page. If you installed scanning components, try a scan as well. For a print-only package, you may need a separate compatible scanner driver to enable scanning.

Common Issues and Fixes

• Install fails or rolls back: Remove existing Brother MFC-T810W software with Brother’s Deinstallation Tool, reboot, then run the downloaded full driver package as administrator. Install the full MFC package, not just the print driver, so scan/fax utilities are included.
• Device not detected: For USB, connect directly to a rear PC port, not a hub. For Wi‑Fi, confirm the MFC-T810W and PC are on the same network, then select the printer by IP address in the installer.
• Driver/version conflicts: Delete old MFC-T810W print queues and Brother drivers in Print Management or Devices and Printers before reinstalling the correct 32/64-bit Windows package. Don’t mix the Windows built-in driver with Brother’s full software.