The Brother MFC 9440CN driver helps Windows communicate with this color laser multifunction printer over a network. It enables compatible printing functions and gives you access to device-specific settings that a basic Windows driver may not provide. When choosing a download for Windows 11, 10, 8, or 7, check that the package explicitly supports your Windows version and system architecture.

Key Features

• Network printing support: Connect to the Brother MFC 9440CN through your local network so compatible computers can send print jobs to the device.
• Device-specific print settings: Access options such as paper size, media type, print quality, and color or monochrome output, depending on the driver package.
• Document layout controls: Adjust supported page-layout settings to prepare everyday documents, reports, and presentation materials for printing.
• Optional multifunction components: Some software packages may include scanning utilities or additional device tools. Check the package contents, as a print driver alone does not necessarily enable every multifunction feature.

How to Install

1. Check your Windows configuration. Confirm whether you are using Windows 11, 10, 8, or 7, and identify whether the system is 32-bit or 64-bit. Select a Brother driver package that lists compatibility with your configuration; older packages should not be assumed to support newer Windows releases.

1. Prepare the network connection. Turn on the Brother MFC 9440CN and connect its Ethernet port to your router or network switch. Make sure your computer can reach the printer on the same network. If needed, locate the printer’s IP address through its network settings or a printed network configuration report.

1. Download and launch the installer. Save the compatible driver package, extract it if required, and run the setup program. Allow administrator access when prompted so the installer can add the necessary Windows components.

1. Choose the network device. Select the network connection option if offered, then follow the prompts to locate your printer. If automatic discovery fails, use its IP address when the installer supports manual entry.

1. Verify the installation. Complete setup and print a test page from Windows printer settings. Review the paper and color preferences before regular use. If you installed a package with scanning support, test scanning separately to confirm that component is configured correctly.

Common Issues and Fixes

• Install fails or stalls: Disconnect USB/network, remove existing Brother MFC-9440CN entries and old Brother drivers, restart Windows, then run the full Brother driver package as administrator. Temporarily disable antivirus if setup is blocked.
• Device not detected: Confirm the MFC-9440CN is powered on and connected. For USB, use a direct rear port and known-good cable. For network, verify the printer’s IP and add a TCP/IP port manually.
• Version/driver conflicts: Match the driver to Windows architecture (32/64-bit) and remove conflicting generic or older Brother drivers before installing. Restart the print spooler if jobs fail after an update.