The Brother MFC 9130CW driver helps Windows communicate with your multifunction printer, allowing applications to send print jobs and access supported device settings. For a network setup, choosing the correct Brother package helps your computer find the printer and use it reliably over your local Wi-Fi network.

Key Features

• Network printing support: Connects Windows applications to the Brother MFC 9130CW on your wireless network, so you can print without a direct USB connection.
• Print preference controls: Provides access to supported options such as paper size, media type, color or monochrome output, and print quality.
• Scanning support with compatible packages: A full driver and software package may include the components needed to scan documents to your computer. A print-only driver does not necessarily include scanning tools.
• Windows-specific installation: Selecting a package matched to Windows 11, 10, 8, or 7 helps avoid compatibility problems. Check the individual download’s supported versions and system requirements before installing.

How to Install

1. Check your Windows version. Open your computer’s system information and confirm both the Windows edition and system type, such as 32-bit or 64-bit. Choose a Brother MFC 9130CW driver package that explicitly supports your configuration.

1. Prepare the printer and network. Turn on the device, load paper, and confirm that it is connected to your Wi-Fi network. Your computer should be on the same local network; guest networks may prevent devices from communicating.

1. Download and open the installer. Save the appropriate driver package, extract it if required, and run the setup program. Approve the Windows permission prompt if it appears.

1. Choose the network connection option. Follow the installer’s instructions and select your printer from the detected devices. If it does not appear, check its network connection and use its IP address if the installer offers manual discovery.

1. Verify printing and scanning. Complete setup, restart Windows if requested, and print a test page. If you installed scanning components, try a sample scan as well. When printing works but scanning does not, confirm that the selected package includes a compatible scanner driver.

Common Issues and Fixes

• Install fails or stalls: Remove any previous Brother MFC-9130CW software with Brother’s Uninstall Tool, reboot, then run the full driver package as administrator. Disconnect USB until prompted.
• Device not detected: For USB, use a direct rear port and known-good cable. For network, confirm the printer’s IP, wake it from sleep, and re-add it using the correct TCP/IP port; avoid auto-discovery if it fails.
• Driver/version conflicts: Delete duplicate MFC-9130CW queues in Printers & scanners, clear stuck jobs, and install the matching Windows 32/64-bit Brother package. Don’t mix the Windows built-in driver with Brother’s full driver.