The Brother MFC 8710DW driver lets Windows communicate with your multifunction laser printer for network printing and, with the appropriate scanner software, scanning. Installing a compatible Brother package helps your computer recognize the device and access its supported functions over an Ethernet or wireless connection.

Key Features

• Network printing support: Send documents to the Brother MFC 8710DW from computers connected to the same local network.
• Print settings access: Adjust paper size, print quality, and automatic two-sided printing through the printer’s Windows preferences.
• Scanning integration: A package that includes the scanner driver enables compatible applications to receive scans from the flatbed or automatic document feeder.
• Windows compatibility options: Choose a driver listed for Windows 11, 10, 8, or 7, checking the package details for your exact Windows version and system type.

How to Install

1. Check your Windows system. Open your computer’s system information and confirm the Windows version and whether it uses a 32-bit or 64-bit system. Select a Brother MFC 8710DW driver package that explicitly supports that configuration.

1. Prepare the network connection. Turn on the printer and connect it to your router using Ethernet or configure its wireless connection. Make sure your computer can reach the printer on the same network; guest Wi-Fi may block communication between devices.

1. Download and run the installer. Save the compatible driver package, extract it if necessary, and launch the setup program. Approve the Windows permission prompt when requested.

1. Select the printer. Choose the network connection option and follow the installer’s prompts. If the printer is not discovered automatically, check its network settings and use its IP address if the installer offers manual selection.

1. Test the installation. Print a Windows test page, then review the default paper and duplex settings. If you installed scanner software, try a sample scan as well.

For printing only, a printer driver may be sufficient. If you also need scanning tools, check the package description before downloading rather than assuming every network driver includes them.

Common Issues and Fixes

• Install fails or stalls: Disconnect USB until prompted, uninstall older Brother MFC-8710DW software, then run the full driver package as administrator. For network setup, use the printer’s IP address.
• Device not detected: Confirm the printer and PC are on the same subnet, print a network configuration page, and reserve/assign a static IP. Re-add a Standard TCP/IP port with that IP and check firewall settings.
• Driver/version conflicts: Remove duplicate MFC-8710DW entries and old/generic drivers in Devices and Printers, then install the current Brother package and select the correct USB or TCP/IP port. Avoid mixing Windows Update and Brother full-package drivers.