The Brother HL L8350CDW Series Printer driver allows Windows to communicate with your printer and send documents using the correct print settings. Installing a compatible Brother driver helps you access color printing, two-sided output, and paper-handling options rather than relying solely on a basic Windows printer driver.

Key Features

• Color and monochrome print controls: Adjust available color, grayscale, and quality settings to suit everyday documents, presentations, or graphics.
• Automatic duplex options: Select two-sided printing from the driver’s preferences to reduce paper use when printing longer documents.
• Paper and tray settings: Match the paper size, media type, and paper source to the material loaded in your Brother printer.
• Connection support: Configure printing over USB or a supported wired or wireless network connection, using the appropriate driver and setup method.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7. Where applicable, check whether the system is 32-bit or 64-bit so you can choose the matching driver package.

1. Download the compatible driver. Select the Brother HL L8350CDW Series Printer driver listed for your operating system. Save the installer to an accessible folder, then close any applications that may be using the printer.

1. Prepare the printer connection. Turn on the printer and make sure it is ready. For network installation, connect it to the same local network as your computer. If installing through USB, follow the installer’s instructions on when to attach the cable.

1. Run the installer. Open the downloaded file, allow Windows to make changes if prompted, and follow the setup instructions. Choose your connection type and select the correct printer if multiple devices appear.

1. Verify the installation. Open the Windows printer settings and print a test page. Review the printing preferences to confirm paper size, color mode, and duplex settings before starting your first print job.

If the printer is not detected, check its connection and restart it before trying setup again. For network printing, a changed printer IP address or a disconnected wireless connection can prevent an otherwise correctly installed driver from reaching the device.

Common Issues and Fixes

• Install fails or stalls: Remove any existing Brother HL-L8350CDW entries in Devices and Printers, run Brother’s uninstall tool, reboot, then install the full Brother driver package rather than the Windows generic driver.
• Printer not detected: Confirm the HL-L8350CDW is on the same network/subnet or connected via USB; print a network configuration page, enter the correct IP in the Brother installer, and temporarily disable VPN/firewall blocking.
• Driver version conflicts: In Print Management, delete conflicting HL-L8350CDW drivers and ports, reinstall the latest Brother package, then set it as default to prevent Windows Update from replacing it with a generic driver.