The Brother DCP 8065DN driver lets Windows communicate with your multifunction laser printer so you can send documents to print and adjust supported device settings. Installing the appropriate Brother software can also enable scanning features, depending on the package you choose. For Windows 11, 10, 8, or 7, check the download’s compatibility details before installation, as available drivers and functions may differ between versions.

Key Features

• Reliable document printing: Provides the connection between your Windows applications and the printer, helping documents reach the device with the correct print settings.
• Flexible output settings: Gives access to supported options such as paper size, orientation, print quality, and automatic two-sided printing.
• USB and network setup: Allows configuration for a direct USB connection or use over the device’s wired Ethernet connection, depending on the selected driver and setup method.
• Scanning support: A compatible scanner driver or multifunction software package can help you scan documents into Windows applications. A print-only download may not include this functionality.

How to Install

1. Check your Windows version. Open your PC’s system information to confirm the operating system and architecture. Select a driver explicitly listed as compatible with your version of Windows; do not assume an older package supports Windows 11.
2. Choose the right package. Download the printer driver for printing alone, or select a compatible multifunction package if you also need scanning. Review any installation notes before proceeding.
3. Prepare the connection. Turn on the Brother DCP 8065DN and make sure it has paper loaded. For network installation, connect it to the same local network as your PC. For USB setup, wait to connect the cable if the installer instructs you to do so.
4. Run the installer. Extract the downloaded files if necessary, launch the setup program, and follow the prompts. Choose the correct connection type and select your printer when it appears. If the download has no installer, use Windows’ printer setup options and follow the package instructions.
5. Confirm operation. Restart Windows if requested, then print a test page and check your preferred paper and duplex settings. If you installed scanning software, try a sample scan as well.

If setup cannot detect the printer, check the USB cable or Ethernet connection and confirm that the device is powered on. For a network connection, verifying the printer’s IP address can help you select the correct device.

Common Issues and Fixes

• Installation fails or stalls: Run the Brother DCP-8065DN setup as Administrator and use the full driver package, not only the basic Windows driver. Disconnect the USB cable until the installer prompts, and temporarily disable antivirus if it blocks the setup.
• Device not detected: For USB, connect directly to the PC—not a hub—and try another port/cable. For Ethernet, confirm the printer’s IP address, set a fixed IP if needed, and verify the Windows printer port points to that address.
• Driver/version conflicts: Uninstall any existing Brother DCP-8065DN driver and software, restart Windows, then reinstall the correct 32/64-bit package for your Windows version. Remove duplicate printer entries and select the Brother driver, not a generic laser driver.