The Brother DCP 385C driver helps Windows communicate with your all-in-one printer so documents and photos reach the device with the correct print settings. Installing a compatible driver can also restore missing printer options after a system change or help resolve problems caused by an incorrect driver.

Key Features

• Printer recognition: Enables Windows to identify the Brother DCP 385C and send print jobs through its USB connection.
• Print quality controls: Provides access to supported settings such as paper size, media type, orientation, and print quality.
• Color and grayscale options: Lets you choose suitable output settings for everyday documents, color graphics, or photo printing.
• Scanning support with the appropriate package: A compatible scanner driver or full software package can enable scanning from the device to your computer. A printer-only download may not include this functionality.

How to Install

1. Check your Windows version. Before downloading, confirm whether your computer runs Windows 11, 10, 8, or 7, and check its system type where applicable. Driver availability and included features can vary by Windows release, so verify compatibility rather than assuming one package supports every version.

1. Choose the right driver package. Select a Brother DCP 385C download that explicitly matches your operating system. If you need both printing and scanning, check whether the package includes scanner support or requires a separate download.

1. Prepare the printer and computer. Turn on the printer, load paper, and close any open printing or scanning applications. If you are replacing a faulty installation, remove the old printer software first and restart Windows if prompted.

1. Run the installer. Open the downloaded file, allow it to make changes when requested, and follow the setup instructions. For a USB installation, connect the printer when the installer tells you to; connecting it too early may cause Windows to select a different driver.

1. Verify the installation. Open the Windows printer settings, select the Brother DCP 385C, and print a test page. If you installed scanning components, test a scan as well. When no compatible installer is available for your Windows version, check Brother’s compatibility guidance and Windows Update for supported alternatives.

Common Issues and Fixes

• Install fails or stops midway: Run the Brother installer as administrator, close other printer software, and disconnect the USB cable until the installer asks for it. If it still fails, remove previous DCP-385C software with Brother’s Uninstall Tool, reboot, then reinstall.
• Device not detected: Use a direct USB port—not a hub—and a known-good cable. Power the DCP-385C on, then check Device Manager for an unknown USB device. Reconnect after the driver installation prompts.
• Driver/version conflicts: Uninstall older Brother DCP-385C or other Brother printer drivers and scan software before installing the Windows package. Use the official Brother download for your Windows version; avoid third-party driver updaters.