The Brother DCP 1512E driver allows Windows to communicate with your multifunction laser printer, enabling document printing and access to supported device settings. Installing the appropriate Brother software can also provide scanning support, helping you use both functions from your computer rather than relying only on standalone copying.

Key Features

• Reliable printer communication: Lets compatible Windows applications send documents to the Brother DCP 1512E over its USB connection.
• Print settings control: Provides access to options such as paper size, orientation, and print quality, so you can adjust output for everyday documents.
• Scanning support: When included in the selected software package, the scanner driver enables compatible applications to capture documents from the flatbed scanner.
• Windows integration: Helps Windows recognize the device correctly and makes it available through the system’s printer settings.

How to Install

1. Check your Windows version. Confirm whether your computer runs Windows 11, 10, 8, or 7, and check its system type where applicable. Choose a package explicitly listed as compatible with your operating system; availability may differ between Windows versions.

1. Select the software you need. Download the appropriate Brother DCP 1512E driver. If you need both printing and scanning, look for a full driver and software package or install the separate printer and scanner components offered for your system.

1. Prepare the printer and computer. Make sure the printer has power and close any open applications. If you are using a guided Brother installer, leave the USB cable disconnected until the setup program asks you to connect it, unless its instructions say otherwise.

1. Run the installation. Open the downloaded installer, allow administrator access if prompted, and follow the on-screen instructions. Connect the printer directly to a USB port when requested, then wait for Windows to finish detecting it.

1. Verify printing and scanning. Open Windows printer settings, select the Brother DCP 1512E, and print a test page. If you installed scanning software, try scanning a document as well. Should either function be unavailable, check the USB connection and confirm that the corresponding driver component was installed.

Common Issues and Fixes

• Driver install fails or stalls: Disconnect the USB cable, uninstall any existing Brother/Windows generic printer entries, then run the Brother DCP-1512E installer as administrator. Reconnect USB only when the installer prompts.
• Device not detected: Power on the DCP-1512E and try a different USB 2.0 port/cable directly on the PC, not a hub. In Device Manager, remove any unknown/USB printing device, restart the Print Spooler service, then reinstall.
• Version conflicts / wrong driver: Windows Update may install a generic driver over the Brother package. Remove both entries in Printers & scanners, reinstall the DCP-1512E-specific driver, and set it as default. For scanning, confirm the Brother scanner driver is also installed.