The Bixolon SRP 350II driver helps Windows communicate with your receipt printer, allowing compatible checkout and business applications to send print jobs correctly. For a network-connected setup, the appropriate driver and printer port configuration work together to route receipts to the printer on your local network.

Key Features

• Windows printing integration: Makes the Bixolon SRP 350II available to compatible applications through the Windows printing system.
• Network port support: Works with a correctly configured network printer port so computers can send jobs to an Ethernet-equipped printer.
• Receipt layout settings: Provides access to the printing preferences supported by the driver, helping you match paper width, orientation, and layout to your receipts.
• Print queue management: Lets you use Windows tools to view pending jobs, cancel unwanted output, and check basic printer status.

How to Install

1. Check your Windows version. Confirm whether you use Windows 11, 10, 8, or 7, and check your system architecture. Choose a driver package that explicitly supports your operating system and the SRP 350II model.
2. Prepare the printer connection. Load receipt paper and turn on the printer. If your unit has an Ethernet interface, connect it to the local network and identify its IP address using its network configuration information.
3. Download and extract the driver. Save the appropriate Bixolon driver package to your computer. If it is compressed, extract the contents before running the installer.
4. Run the setup utility. Follow the prompts, selecting the correct printer model and connection type. For network printing, enter the printer’s IP address when requested, or add a Standard TCP/IP port through Windows printer settings if needed.
5. Verify the installation. Open the printer’s properties and print a test page. Then check the receipt settings in your checkout application and select the newly installed printer.

If the printer remains offline, confirm that its IP address matches the configured Windows port and that your computer can reach it on the network. An IP address that changes can interrupt printing, so consider a reserved address through your router or network administrator.

Common Issues and Fixes

• Driver install fails: Use the Bixolon SRP-350II driver matching Windows 32/64-bit. Run the installer as administrator, close POS software first, and allow unsigned drivers only if Bixolon’s package requires it.
• Printer not detected: Confirm the SRP-350II is powered on and print a self-test. Try another USB port/cable, then check Windows port settings—use USB001 for USB models or the correct virtual COM port for serial.
• Version conflicts: Remove old Bixolon or generic receipt-printer drivers via Print Management, reboot, then install the latest SRP-350II driver. Set it as the default printer and reselect it in your POS software.