The AT2020 USB is a USB condenser microphone for recording vocals, spoken audio, and other sound sources directly to a computer. Its driver allows Windows to recognize the microphone as an audio input and make it available to compatible recording and communication apps. This model generally uses the built-in Windows USB audio driver, so a separate manufacturer driver may not be necessary.

Key Features

• USB audio recognition: Helps Windows detect the AT2020 USB and list it among available recording devices.
• Application access: Makes the microphone available to software used for voice recording, online meetings, streaming, and audio production.
• Windows input controls: Allows you to select the microphone and adjust available recording settings through Windows sound controls.
• Straightforward setup: Uses standard USB audio support, reducing the need for additional driver software.

How to Install

1. Connect the microphone. Plug the AT2020 USB into an available USB port using a suitable USB cable. For initial setup, connect directly to the computer rather than through a USB hub.
2. Allow Windows to configure it. Windows 11, 10, 8, or 7 should attempt to detect the microphone and load its built-in USB audio driver. Wait for device setup to finish before opening your recording application.
3. Check the input device. Open Windows sound settings or the Sound control panel and locate the microphone under input or recording devices. It may appear under a generic USB audio name.
4. Select it in your application. Choose the microphone as the audio input in your recording or calling software. On Windows 11 and 10, also check microphone privacy permissions if an app cannot access it.
5. Test the recording. Record a short sample and adjust the input level as needed. If the microphone is missing, try another USB port, check the cable, and review Device Manager. Only install a separate download if the manufacturer identifies it as compatible with your exact model and Windows version.

Common Issues and Fixes

• Installation fails or Windows shows “USB Audio Device” with a warning. Unplug the AT2020 USB, restart Windows, and install the downloaded package as administrator. If an older audio driver is present, remove it via Device Manager > Sound, video and game controllers before reconnecting.
• Microphone not detected. Use a direct rear USB port instead of a hub, replace the USB cable, and check Windows Settings > Privacy > Microphone and Sound settings. Set AT2020 USB as the input device and allow apps microphone access.
• Version conflicts or no sound after an update. Roll back the audio driver in Device Manager, then reinstall the package matching your Windows version and architecture. Disable exclusive mode or audio enhancements if the mic works but recordings are silent or distorted.