Xerox Workcentre 5755 Driver

The Xerox Workcentre 5755 driver lets Windows communicate with this Xerox multifunction printer over a network, so documents reach the correct device with the selected print settings. It is useful for office users setting up a shared printer, reconnecting after a Windows upgrade, or troubleshooting printing problems.

Key Features

• Network printing: Connects your Windows computer to the Workcentre 5755 through your office network, using the printer’s IP address or a shared print queue.
• Print settings: Provides access to options such as paper size, tray selection, orientation, and two-sided printing, depending on the driver and device configuration.
• Finishing controls: Compatible driver packages can expose supported finishing options when the corresponding hardware is installed and configured.
• Windows setup support: Helps Windows identify the printer and use the appropriate printing interface. For Windows 11, 10, 8, or 7, check the individual package’s compatibility before downloading.

How to Install Xerox Workcentre 5755 Driver

1. Check your Windows system. Confirm your Windows version and system architecture in Settings or System Information. For Windows 10/11, verify explicit compatibility rather than assuming an older package will work.
2. Choose a suitable package. For your Xerox Workcentre 5755 driver download for Windows, select a package that lists your operating system and printer model. Look for the latest version compatible with your setup; a free download should not require purchasing a separate driver-update utility.
3. Prepare the network connection. Turn on the printer and make sure your computer can reach it on the network. Obtain the printer’s IP address from its control panel, configuration report, or your IT administrator.
4. Install the driver. Run the downloaded installer and follow its prompts. If the printer is not discovered automatically, use Windows printer settings to add it by IP address, then select the downloaded driver when prompted.
5. Verify the configuration. Open Printer properties, confirm any installed trays or finishing accessories, and print a test page. If printing fails, check the IP address, selected port, and network access.

Keep the driver updated when Xerox provides a compatible release that addresses your needs. An update may resolve printing issues or improve compatibility after Windows changes, but review the package notes before replacing a working installation. Retain the previous installer if your office needs a rollback option.

Common Issues and Fixes

• Install fails or stalls: Remove any existing Xerox WorkCentre 5755 driver via Devices and Printers > Print server properties, reboot, then run the full Xerox package as administrator. Temporarily disable antivirus if it blocks the installer.
• Device not detected: Confirm the printer is on the same network/subnet, print a configuration page for its IP, and add it manually using a Standard TCP/IP port with the correct 5755 driver. For USB, use a direct rear port and a known-good cable.
• Version conflicts or missing features: Uninstall old PCL/PS drivers, then install one Xerox-recommended package matching your 32/64-bit OS. Avoid mixing Windows Update and Xerox drivers; restart the print spooler after installation.