The Android Remote NDIS based Device driver allows Windows to recognize a compatible Android device as a network adapter over USB, typically for USB tethering. Although listed under the Camera category, this device entry generally handles network connectivity rather than camera functions. For Windows 11, 10, 8, or 7, choose a driver package that matches your system and the connected device.

Key Features

• USB network recognition: Helps Windows identify the Android Remote NDIS based Device and make its network interface available.
• Tethering support: Enables communication needed to share an Android device’s internet connection with a PC when USB tethering is supported and enabled.
• Windows networking integration: Allows the connection to work through standard Windows network settings, where you can view its status and troubleshoot connectivity.
• Device identification: A compatible driver can resolve missing-driver warnings or an unrecognized Remote NDIS entry in Device Manager.

How to Install

1. Check compatibility before downloading. Confirm your Windows version and system architecture, then select a matching package from the manufacturer. Support can vary between Android models, so check the package’s compatibility information rather than assuming every release works with Windows 11, 10, 8, and 7.

1. Connect the Android device. Use a USB cable that supports data transfer, unlock the device, and enable USB tethering in its network or hotspot settings. The setting’s name and location may differ by model. A charging-only cable will not provide the required connection.

1. Install the driver. If the download includes an installer, follow its instructions. For a package containing driver files, extract them, open Device Manager, locate the relevant Android or unknown network device, and select Update driver > Browse my computer for drivers.

1. Select the extracted folder. Let Windows search the folder and install a compatible driver. Do not force an unrelated driver or bypass security warnings. If Windows reports no matching driver, recheck the package and device compatibility.

1. Verify the connection. Restart the PC if prompted, reconnect the device, and enable tethering again if necessary. Check that the adapter appears without a warning icon in Device Manager, then test internet access. If it remains unavailable, try another data cable or USB port and confirm the Android device has an active connection that permits tethering.

Common Issues and Fixes

• Install fails or driver is rejected: Run the installer as administrator, connect the Android device directly to a USB port, and confirm the vendor package matches your Windows version and architecture. If Windows blocks an unsigned driver, verify the source before changing signature-enforcement settings.
• Device not detected: Enable USB tethering on the Android device—not just USB debugging—and use a data-capable cable. Reconnect, set USB mode to tethering if prompted, then check Device Manager for “Android Remote NDIS based Device.”
• Version or driver conflict: Uninstall any existing Android/RNDIS tethering driver and select “Delete the driver software.” Rescan hardware, then install the latest vendor-supplied driver. Avoid mixing Windows Update and manufacturer packages.