HP Color LaserJet 4700 4700n Printer PCL 6 Driver

The HP Color LaserJet 4700 4700n Printer PCL 6 driver enables Windows to send print jobs to your HP color laser printer using the PCL 6 printing language. It is intended for users setting up the printer over a network, reinstalling it after a Windows change, or troubleshooting printing problems.

Key Features

• PCL 6 printing support: Translates output from compatible Windows applications into instructions the printer can process for everyday documents, reports, and color presentations.
• Print settings control: Provides access to options such as paper size, orientation, color mode, and print quality, depending on the driver package and printer configuration.
• Network printer setup: Supports printing to a network-connected device when the correct connection settings and printer address are configured.
• Hardware option configuration: Helps Windows recognize available paper trays and supported accessories. Features such as automatic duplex printing require the appropriate printer hardware.

How to Install HP Color LaserJet 4700 4700n Printer PCL 6 Driver

1. Check your Windows system. Identify whether you use Windows 11, 10, 8, or 7, and confirm your system architecture. For Windows 10/11, especially, verify that the selected package explicitly supports your operating system; older drivers may not.
2. Choose a suitable package. Before starting your HP Color LaserJet 4700 4700n Printer PCL 6 driver download for Windows, check the compatibility details and select the latest version available for your setup. Use a trusted source for a free download, and avoid installers that bundle unrelated software.
3. Prepare the printer. Turn it on and connect it to your network. Confirm that your computer can reach the printer, and note its IP address if you need to add it manually.
4. Install the driver. Run the downloaded installer and follow its prompts. If the package contains driver files without an installer, extract them, open Windows printer settings, and add the printer using its IP address and the supplied driver files.
5. Verify the setup. Review paper and accessory settings, then print a test page. If the printer does not respond, check its address, connection, and selected printer port.

Keep the driver updated when a compatible update addresses a printing issue or improves Windows compatibility. Before replacing a working driver, review the package details and retain a copy of your current installer so you can restore your previous setup if needed.

Common Issues and Fixes

• Install fails or exits early: Remove existing HP Color LaserJet 4700/Universal PCL 6 queues and ports, stop the Print Spooler service, then run the HP installer as administrator. Match the package to your Windows version and 32/64-bit architecture.
• Printer not detected: For USB, connect directly to a rear port, not a hub. For network, confirm the 4700n has a valid IP and that TCP port 9100 is enabled; add it manually using a Standard TCP/IP port and the HP PCL 6 driver.
• Driver/version conflicts: Do not mix Universal PCL 6 and device-specific 4700 PCL 6 drivers on the same queue. Delete duplicate printers, clear stale spooler files, and keep one correct 4700 PCL 6 queue as default.