Lexmark X364dn Driver

The Lexmark X364dn driver connects your Windows computer to this network-ready monochrome multifunction printer, allowing applications to send print jobs with the appropriate device settings. For Windows 11, 10, 8, or 7, choose a Lexmark driver package that explicitly supports your operating system and system architecture before downloading.

Key Features

• Network printing support: Enables compatible Windows PCs to print to the Lexmark X364dn over a local network once the printer is connected and reachable.
• Print layout controls: Provides access to supported settings such as paper size, orientation, copy count, and multiple pages per sheet.
• Two-sided output: Lets you select automatic duplex printing when the installed driver recognizes the printer’s duplex capability, helping reduce paper use.
• Device configuration options: Allows Windows to use the printer’s available paper sources and supported output settings. Scanning and fax functions may require separate software rather than the print driver alone.

How to Install

1. Check your Windows version. Open your PC’s system information to confirm the operating system and whether it uses a 32-bit or 64-bit architecture. Verify that the selected package lists support for your configuration; older drivers may not support Windows 11.
2. Prepare the printer connection. Turn on the Lexmark X364dn and connect its Ethernet port to your router or network switch. Make sure your computer can reach the same local network.
3. Download and open the driver package. Use a trusted Lexmark driver source, extract the files if needed, and run the installer. Approve the Windows administrator prompt if requested.
4. Add the network printer. Follow the setup prompts and select the X364dn from the discovered devices. If it does not appear, use its IP address, which you can find through the printer’s network settings or a network setup page.
5. Confirm settings and test printing. Finish installation, open the printer’s preferences in Windows, and check paper and duplex options. Print a test page to verify communication before sending regular documents.

If setup fails, confirm the printer’s IP address and check that the downloaded package matches your Windows version. Avoid assuming that a print-only driver also installs scanning tools.